Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
You can do this with the stock convertor. Most older trans shops will have a book showing where and how much weight to put on the torque convert to keep the rotating mass in balance. On a cast crank 400, it will be 2 small weights, one on each side of the drain plug. These are tack welded on...
The motor home 727's I have seen so far have had a flange installed on the tall shaft in place of a yoke. I used to rebuild transmissions and told my buddies we could just unstack the tranny and change the output shafts and tail housing and should be good to go. I have not seen the internals but...
I have a buddy that has bought a couple of 413 motor home engines and is making street engines from them to go into a couple of '62 Darts he has. One engine was a good running one so he is going to keep the stock low compression pistons for now. The pistons(low comp), heads(smaller ports, heavy...