Separate names with a comma.
i see these on ebay a lot
NEW 1962-71 Seat Track Return Springs
( 162682232941 )
thank you very much justin.
do anyone know how to install this piece at the bottom end of console [ATTACH] see pic.thanks
anyone know what shade and where to buy that color? thanks
does anyone know what paint was used on those parts,the front trim piece and the two side pieces,flat or gloss. thanks
do you have the correct trans speedometer gear ratio for rear tire size.
super nice job scott.looks fantastic.
justin i notice in one pic of gtx there are three holes at front inside floor board and cowl,do you recall what those holes are for? see pics...
i think r/t specialties sells them.
i used a light hammer to tap mine out.
anyone know what size are those two bolts that goes at the top of a standard dash over speedometer? see pics below. one on far left and far right...
r c ,try this site mikehagenantiqueautoradio.com.scroll to page 7 and you will see mopar radios.
for those two courtesy lights on console.thanks
do anyone know how the short bracket that is upfront close to the firewall, i know its welded to floor,but how do you connect it to console front...
someone had same question awhile back, but i can not find it here.thanks
how so you get glove box door to align at the top it has a larger gap at top than before i removed it.i got it seated at top with screws back in...
i would greatly appreciate it if you can measure. thank you
69 roadrunner,i want install a 4 speed console in my car has factory 4 speed,anyone know how to mark off the floor brackets in right spot to mount...
69 b body if the car came from factory with buckets did they all have consoles? i have lynch rd fender tag,shows medium grade buckets on it. this...