Separate names with a comma.
Thats good to know. Last time I talked to Firm Feel and Steer and Gear, neither had any 20:1 parts. Been a couple of years ago now....
And they have the parts to do the 20:1 conversion?
Don't think you will find anybody to make you a 20:1. The parts have been gone for awhile now. I have heard rumors that PST is working on making...
Neat. Your car definitely deserves the press.
This car has a Dana 60. I did order custom backspacing to center the wheels in the opening. 5 1/8 or 5 1/4 if I remember correctly.
Yep, you were told correct. A lot of guys just cut off the tranny shaft when putting a 4-speed in an automatic car. You can then use a pilot...
Dantes sells some nice ones.
I've bought quite a bit from Tom over the years. It does sometimes take a couple of phone calls to get ahold of him. I'm not positive, but I...
I think a 30 would be too low. Probably would need a slow blow style also?
Could try your local Fastenal for the spring nuts also.
I've been very happy with Grundy also. They let you insure a car for an agreed upon value and like stated previously, charge accordingly.
X2. On my 1969 cars, the tires will hit the inner wheelhouses before the springs when everything is stock.
I've used 2 of the 6 quart Hemi pans from 440 Source on my 1969 cars with no problems. Not sure if they would fit your 62 though.
Get ahold of Mark at MAD Electrical. He sells everything you will need and is very knowledgeable about our cars electrical systems.
Don't for get!!... try the other side i did the same thing with my 15x10 with a 5~inch back space and one side i could put my fingers between the...
15x10 295/50/15, 15x7 245/60/15[ATTACH][ATTACH][ATTACH] [ATTACH]
Glad to hear you are sticking with it. The worst is behind you imo.
That's what I was thinking. One of the 3 that go through the motor housing and around the firewall studs.
Looks like a windshield wiper motor grommet?
That's what I was thinking. You're not even close to being ass deep into a great looking car. I agree - cover it up and take a year off if you...