Search results for query: *

1971 ex police. Factory 383hp. Now 440hp Currently going back to white.

PM me. I have a nice one with just flash rust, and one to get the support rods off of. It has the brake rod bolt and a switch. And if you want the other support rods for non rallye dash, they are still on the front clip.

Saw your post, but know nothing about the ins and outs of 71 hoods. I thought the imprint looked like a turn signal indicator, so I went looking for pictures. Only found one picture, but I found this thread here which supports turn indicators on hood...

I understand how to find my ads. I want them to show up for others. Especially in the similar items search below other for sale items.

I am using duck duck go, so I have no ads. But I find a search for my sale posts do not come up, unless I put my user name in the member box. The ad I post will show similar items at the bottom. I have gone so far as to copy and paste a similar items description as mine, and their post will...

If you have slider calipers mounted to the rear, you can use 73 up b body hoses. They are long enough to put the twist in so they clear on turning. For all I know F body and 73 B body hoses are the same length.

I added an (s) to crossmember, so it doesn't come up in a search. My post for crossmembers for sale 66-69 is sold https://www.forbbodiesonly.com/moparforum/threads/transmission-crossmembers-66-69-71-72-and-73-74.300011/

A full face mask is essential. While good air flow, shootsuit and standard respirator will get most of it, the overspray blow back will get in the eyes and absorb faster than filtered fumes the lungs. Most people can't make the commitment to a fresh air supply for 1 or 2 bits of painting. I've...

As long as the balancer is pre 71, the bolt pattern is asymetrical. The power steering pump is the issue for belt width.

68 or 69. They are different. Here's a 68 with 3/8 ps belt width. (Inbox is full) Always have to ask, what year motor?

Dave6T4 is trying to talk some sense into you, but this is the same debate as trying to use an 8 3/4 behind a 440. Full torque will make the od gear put too much force on the aluminum case and spread it, eventual failure. Iron case will slow down the failure. Using as a crutch for 3.91 or 4.10...

I just want to know if $500 is real for NOS?

Just checked for part number. The one listed xxx672 is a right plymouth according to my known one. If it fits charger?, I do not know.

If anyone needs this one or one of the others, pm me.

Power brake only masters do not have a provision( pocket with rubber bushing) to retain the brake pushrod used on manual brakes. They rely on booster pushrod to hold plunger in location.

I have a core that needs sleeving and rebuilding. https://www.forbbodiesonly.com/moparforum/threads/bendix-2225621-master.304254/

Thats a drum master. So its good that you are going to replace.

Got a set of each. No rust pitting. I could lay out for more pictures if needed. @ornaryal $125 each set plus shipping.

I'm going to say dart. Here's a picture of one on fabo. I believe the coronet finger lever is longer.

That is sad to hear. On my paint booth door.