Separate names with a comma.
Thanks 68, I don’t have a tray yet. Kim
Will the 440-6 oil pan work on a 543 stroker? Or will there be clearance issues? 4.5 inch stroke. Thanks. Kim
Have a good look at the cam lobes and at all the lifters. Check for a bent pushrod or bad rocker. Kim
I would say yes also. My buddy built a 440 a long time ago to run on LPG. Built it the same as a gas other than 11.5 or 12.5-1 pistons. Street...
I would say maybe a hand full. Kim
Yes the 383 hp came with hp manifolds in the C bodies. I’ve had a few.
It’s a power steering bracket. Kim
Get a much better cam and a bigger set of headers. Otherwise ur waisting those heads. Kim
A good welder can fix that right up 4 ya. Kim
I could check some of mine if need be. Kim
I’ve seen many siliconed. Kim
I think it is well worth the 18Gs he is asking if it is anywhere near as good as he says it is. Kim
Nice job. Kim
Have u ever checked to see how much play is in the rear transmission tail shaft bushing? Should be nil to just noticable anymore than that it...
U say u checked the diff angle at .5 degree, is that up or down? What is it tranny angle? Up or down or 0.u need at least 3 degrees difference...
Possibly the 6 pac cam. Kim