• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. 1967coronet

    I knew about driveline offset, but didn’t know this easy check. Thanks UTG!

    Bob's your uncle ..... Sundays 7 eastern 8 central .
  2. 1967coronet

    Should i reuse Hydraulic lifters

    Go to the parts store and get a oem style pump. A 180 thermostat. If the engine is not over heating at lower rpm and idle I do not think it's plugged. Higher rpm heating is most times caused by lack of air flow. Stock style fixed or clutch fan and shroud. Hood to radiator seal, hood to cowl...
  3. 1967coronet

    Need help with starter

    Powermaster 3257 Powermaster OEM-Style High-Torque Replacement Starters | Summit Racing Here is a oem style at Summit. We're in Iowa are you rduckert ? I'm west of Des Moines in Panora.
  4. 1967coronet

    Need help with starter

    I just was on the napa sight Oem style rebuild is $68.99 exchange # RAY2441083 Or the mini or Dakota style 164.99 new, # NRO4N6415 What part number did they sell you ?
  5. 1967coronet

    Need help with starter

    Welcome to a great sight. Post in the welcome wagon and introduce your self, We will need pics also, we like pictures. Back to the starter.... so what did they give you ? Our local napa the kids head starts to smoke if you hit him with anything pre 90s.
  6. 1967coronet

    Finished doing rebuild on 8 3/4 rear end

    Time and money well spent. I need to run new brake lines also. Looks good !
  7. 1967coronet

    Installing a new flat tappet cam?

    Good thread Lloyd, to echo Greg yes there are a lot of crap lifters being sold. I still think many break in problems come from spring pressure and install height, coil bind ect. Mabey just me but it seems spring pressures have went up as lifter and cam quality have went down. As kids in the...
  8. 1967coronet

    440 short block

    Grab a straight edge and your feeler gauges and check the block deck from front to back. Valley side , outside , I think your block is off.
  9. 1967coronet

    Drilling an aftermarket hipo axle flange for access to the axle retainer nuts.....using a 'unibit'??

    Cranky , if he has a uni bit that will drill that flange I would really like to have the brand info on it. :luvplace:
  10. 1967coronet

    Hydraulic Engine Lifters

    Ron the pre 68 383 used a different size lifter/pushrod combo. You can not mix the two, that's why the parts suppliers just list 68 and up. You can use the newer 68 and up sets in the older pre 68 blocks as long as you use both new push rods and new lifters.
  11. 1967coronet

    Need to pull the front apart on my 440.

    Fran, I can not find a thing wrong with that set. I have not spun each roller but it looks good, gears have no odd wear ect. But it was not going back in lol. The battery powered stethoscope is back at the shop. I'm going to grab it tomarrow and have another listen to the timing cover. See how...
  12. 1967coronet

    Need to pull the front apart on my 440.

    Well we got home from our trip. I put the front of engine together this weekend. New chain and gears, intake set ect. Fired the old girl up and the noise is gone. So, it was I think the comp chain and gear set ? That is the only parts changed and that seems to have fixed it. Still has real good...
  13. 1967coronet

    2.93 gears?

    If your 741 / 2.94 ? Gear set is in good shape. Keep it in one piece. Get a 742 or 489 for your new gear set. You may want to run the power tour ect. Someday. :drinks:
  14. 1967coronet

    742 differential and green bearings

    Well , there went a nice quiet Sunday morning.
  15. 1967coronet

    Need to pull the front apart on my 440.

    Henderson La. This morning and making our way to San Antonio. Not to far left to go but have to unload 26ft. Of U haul lol. My brother stopped at my place and was looking at my engine, he also is not seeing any odd gear wear on the cam and pump drive. so I will order a new chain and gear set ...
  16. 1967coronet

    Need to pull the front apart on my 440.

    Fran, the engine did set for 5 days. I know like you guys I would expect a little more oil on things. One plus I did take my hand and wipe the bottom of the crank gear/chain area and had oil on it. So that's a plus. After 4 yrs the whole engine , tops of heads , inside valve covers, ect are...
  17. 1967coronet

    Need to pull the front apart on my 440.

    now that you mentioned it the gear set and chain was. Inside, pump drive cam ect were wet.
  18. 1967coronet

    Need to pull the front apart on my 440.

    Thanks, I will put a new pump on along with the chain and gear set. The rest of the top is oiled fine. Crazy.
  19. 1967coronet

    Need to pull the front apart on my 440.

    Yes that is looking dry on the gears and cover. Thanks Don & Fran. Its pumping plenty up to the rockers and top end. Last time running we looked at the gauge at temp, 35lbs idle and 65 when you give it some rpm. What would cut flow down to the chain,and gears? Slinger is on it and ok.