Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a couple of questions:
Which shields are you speaking of that are metal for 66? The ones up front by the strut rods? My car only have bolts there and an outline in the dirt.
Are your bumper bolts "domed" or flat style?
Shouldn't your tailpanel have red accent stripe painted...
So I would have to put 7/8" more bend in before resistor to make it lower at the other end after the resistor. What does that bend do to the very end of tube with sock?
I love to buy one of your old units.
WOW Jerry you always have the goods!!!
Can you possibly take measurements on one of those senders?
I know about the linear and non and how the in between readings will be off.
Maybe sit one down like you have those 4 and measure how far back it goes before it bends up with a measurement at the...
I posted a want ad in the want section but really could use some help.
I didn't have a tank/sender or the 2 lower tubes when I bought my car, it had a fuel cell.
I bought a new:
Spectra Premium tank (CR14),
two reproduction lower tubes and a new reproduction fuel sender.
The fuel sender was...
...style battery cables back in my car today even though I have headers. My question is are these other two brackets used in 66? My inner fenderwell only had one hole to accept the bracket shown to hold + cable and bolt.
*****Note not my car found the picture online.*****