• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. M

    distributor cap and rotor tip heating up melting and can't figure out why

    Thanx guys for your help. I am getting 9volts at my coil so my aftermarket MSD blastor 2 should be ok I think and not causing the problem.
  2. M

    distributor cap and rotor tip heating up melting and can't figure out why

    Factory spark plug spacing and air gap is correct. Thanx for your responses. Please continue to help me brain storm.
  3. M

    distributor cap and rotor tip heating up melting and can't figure out why

    Hello I have a 70 charger with a 440hp stock engine. I just converted to a electronic distributor with the summit conversion kit. I also added a MSD blastor 2 coil. Car will run for a week and then stall and distributor rotor head is warped and inside of distributor cap? I replace them and then...
  4. M

    Electrical distributor conversion question

    thank you for your help. Please post pics of your ECU and new voltage regulator set up. nk
  5. M

    FOR SALE 1971 DODGE CHARGER R/T

    I have a 1970 dodge rt charger numbers matching triple black from the factory 440 with floor console automatic. it is 85% restored. Just needs final tx9 paint, interior door panels, dash pad cap, head liner, rear speaker felt cover and rear speakers, new seat cover for drivers side. Would you...
  6. M

    Electrical distributor conversion question

    I am changing my stock distributor set up to a summit racing electrical distributor conversion kit. The kit comes with a ECU and my question is: do I replace my stock voltage regulator with the new ECU that comes with my conversion kit? Or will I have to still keep my stock voltage regulator...
  7. M

    Need help with diagnosing possible electric problem

    could I just disconnect the plug that goes into my stock regulator? Or if I did this something else wouldn't work?
  8. M

    Need help with diagnosing possible electric problem

    Battery's good it new. Please tell me more about how to disconnect my stock regulator since my new alternator has a regulator attached to it and I am not using my field connections due to its a one wire hookup alternator.
  9. M

    Need help with diagnosing possible electric problem

    With the one wire hook up alternator, it has a built in regulator so it's not even hooked up to my stock regulator. Is there something else that runs through my stock regulator still that woukd be causing my problem?
  10. M

    Need help with diagnosing possible electric problem

    So I put in a 100 amp one wire alternator and tested my battery to make sure it's getting fully charged. I originally had a 65amp alternator that was wired with the 2 field wire connection. So during test drive all went well till I pulled up to a light and put my blinker on. I could hear the...
  11. M

    Need help with diagnosing possible electric problem

    I think this will be my first elimination. I don't have relay and proper wire kit installed I wired it directly to my fuse box accessory 10amp fuse. Would this diagnosis still match the symptoms of my lights dimming and windshield wipers slowing down and car idle slows and almost dies when I...
  12. M

    Need help with diagnosing possible electric problem

    hello, I have a 1970 rt charger. All is stock accept for electric fuel pump. At night when I have my lights on and am at a stop light idling or slow down close to a stop my dash lights start to dim and the idle almost starts to die as if I'm loosing power or the electronic fuel pump is taking to...
  13. M

    speedometer gage, the needle is going out of control

    1970 dodge rt charger. My speedometer needle in my gage is moving randomly all back and forth from 20-110 miles an hour. Everyince and awhile it will do this and my Speedo cable sounds like its stuck. En I will slow down or stop and it goes away. Any idea what the probldn is? Is this just my...
  14. M

    fully rebuilt 440 and restoration complete but my 1970 charger wont start.

    I got it started by putting in a carter electric fuel pump and bypassing the mechanical pump. I have a rebuilt Holley carb and the rebuilt engine sounds and runs great when it is in idle but as soon as I put it into drive or reverse and put on the gas it dies. We saw some dirty fuel go into my...
  15. M

    fully rebuilt 440 and restoration complete but my 1970 charger wont start.

    Please help me trouble shoot. I turn the key and get nothing. I have as 1970 rt charger I fully restored. It was running before I started restoration. Engine was rebuilt and most of my parts, just prefaced gages and connected all wiring. We turned the key and nothing. Please let me know what I...
  16. M

    1970 rt charger

    Can I put in a 833 18 spline 4 speed tranny, pistol grip shifter, bell housing shifting pedals, into my 440 bbl and keep my original 8 3/4 rear? Or do I have to switch to a 9 3/4 rear? It is originally a 727 automatic.
  17. M

    1970 RT charger resto

    I purchased a 1970 et charger with original from the factory 440 and 727 tranny. It is originally black with black vinyl top and black longitude pin stripes with fabric/ vinyl seats. I really want to paint it plumb crazy and put in full vinyl seats but am debating to paint it the way it was from...
  18. M

    68 Dodge Charger RT project car for sale

    Thanks for your help everyone I will upload pics as soon as I figure out how to. It looks like someone deleted my photo album on photobucket ;( lesson learned.
  19. M

    68 Dodge Charger RT project car for sale

    PROS: *> The R/T only has 49,000 miles *> Fender tag is there and in great condition *> Car is primarily complete and put together (not in boxes) *> The tranny is original and was rebuilt 2 years ago *> The interior is in great condition and can be reused with a good detailing; headliner appears...
  20. M

    Glad to finally be a participator!

    My name is Mike, I'm from Corneliuos, OR. I just purchased a 68 RT Charger. From the factory, red with black interior, hardtop, automatic. I have a lot of work ahead if me. I have to put in new floor, trunk pans, do rear frame rail repair or replacement and possibly rear panel patch work. The...
Back
Top