Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
You need to get a wiring schematic for your car and start tracing out the wires involved one by one. Something is mis wired, especially if everything worked prior to the re-wire.
Most new stuff is like that.
Case in point-
My elderly neighbor's Toyota had the battery die while sitting in the garage.
Well, so let's jump it I said. I don't think so Tim...without power we could not release the parking brake or put the car in neutral to roll the car out so that my...
About 8 years ago I replaced my defective standard oil pump with a hi volume oil pump pump on my 66 383. I had not changed out an oil pump before so I did some reading up on the process before doing it. I found a thread, that I recall was on this forum, that suggested packing the new pump with...
When I first worked in the refinery, every pump had rope seals. They all had to have some 'leakage' so they didn't burn up and that was the same way with engines. Only thing is the factory knew just how much they needed and they worked.
I had to chime in here. I had such ridiculously bad service from "Moparts", I filed a Better Business Bureau complaint. Six emails, numerous calls, and I never heard from anyone at that company. Obviously, they could care less about their customers. If they had the last good part for my car on...
Mopar 1970 & Later 383 400 440 & 426 Hemi Big Block Heater Hose Nipples
Not sure what year you are working on but here is pre 1970
Mopar 1964-69 Big Block 383 440 426 Hemi Heater Hose Nipple Kit
Mancini Racing link here to a search for nipples.
MRE - Big Block Heater Hose Nipples
MRE -...
I'm eager to get the custom "528 hemi" RT-stripe done but does anyone have a RT-stripe file for printing? Format should be either ".eps" or ".ai". The stripe has a bend in it that's difficult to calculate.