Search results for query: *

Has anyone tried the new Dash Pad Cover offered by CLassic Industries MB525100. I have one on order which should be availalbe end of August. Note, my new Dash pad came apart while the car was sitting outside on a hot sunny day. I am hoping to use the Dash Pad Cover so I do not have to remove the...

Has anyone tried the new Dash Pad Cover offered by CLassic Industries MB525100. I have one on order which should be availalbe end of August. Note, my new Dash pad came apart while the car was sitting outside on a hot sunny day. I am hoping to use the Dash Pad Cover so I do not have to remove...

Nice to get verification,

Thanks, that's what I thought!!

I have a 70 B body, I know the taillights left and right flash, How about the trun signal light for the fronts. Is it the side marker lights and or the parking lights in the bumper?

Thanks for responding, I was able to order a new Gas Pedal Roller from MrMoParts which is what the accelerator pedal rides on under the dash. I was not sure if one was available and was asking if someone knew the size of the roller. Looks like a pretty well engineered part, rubberized bushing...

Does anyone know the approximate size and type of bushing used which allows the accelerator pedal to move up and down. Mine is missing, I purchased a new gas pedal and used interior linkage but it came with no bushing?

Not at this time, the windows are still not right but I advised my installer to finish up some other things and I will deal with the windows later on.

My installer claims to have come up with something that will work. I will check on it and post what he came up with. Note, Parts Mix is out of the item. the webiste is a little confusing but as the previous reply stated when you click on it shows out of stock.

Thanks for responding, any suggestions on what to do to drive the car with the window up while waiting for the pieces to become available.

Need new door window channel seals, the front ones which go into the frame for the vent window and allow the door glass to go up and down are not being made any more according to Classic, Parts Mix and Dante's. Any suggestions?

I ordered wheel opening moldings for my Hybrid GTX/Roadrunner about a year ago, two different suppliers CLassic and Year One both sets were wrong. I did get my money back. I now see Mega Parts Mopar list them. under their part # 158-WOM6870R Has anyone ordered and installed them? Is Mega Parts...

Outstanding, thank you for the help

Okay, I measured Center of U joint to center of U joint. one driveshaft measured 55 1/2 " and is slightly larger in diameter with very little taper at the splined end. The 2nd driveshaft measured at 51.5 ". The rear axle chunk when I purchased it at Carlisle had a paper tag which read 741 Case...

Thanks for the info

Thanks, I thought that was the measurement

Need some help, I am restoring a 1970 Hybrid GTX/Roadrunner with a 440 CI, Torqueflight Auto trans and Dana 3:54 pose Rear end. I currently have two supposedely B Body Driveshafts one slightly shorter then the other for the car. Does any one know the correct length needed for the drivetrain I...

Actually I have a 1970 Hybrid Roadrunner/GTX which started off as a Satellite. I know the term is Clone but I like the word Hybrid because I took the best from each model on the rebuild. I voted for the 68 but the 69 is right up there as well. Why did I do a 70, the car was given to me by my son...

Thanks for the input. I looked to see if the car show was for a good cause and if a portion of the general admission was being donated. No such thing. It is a NSRA show and the webiste talks about how much is given away in prizes etc. but looks like the prizes come from suppliers. Maybe this is...