• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Hemirunner

    WTB BB Solid Roller Cams

    I’m in need of two big block wedge solid roller cams. Both in the [email protected] range. PM with info. Thanks, Mike
  2. Hemirunner

    WTB Lakewood 15330 scatter shield wanted

    Which one is that? Big block I assume?
  3. Hemirunner

    WTB Cheap tunnel ram base

    Appreciate it. Let me know what you got.
  4. Hemirunner

    WTB Cheap tunnel ram base

    I’m looking for a cheap tunnel ram base for a fab project. It can be for a B or RB engine. I’ll be sawing it up. PM me here Thanks, Hemirunner
  5. Hemirunner

    WTB Stage V Hemi Conversion Heads

    Looking for a set of stage V Hemi Conversion heads and rockers. Prefer used if available. Let me know what you got via response here or PM. Thanks Hemirunner.
  6. Hemirunner

    WTB 4.5 stroke crank

    Did you check with Tom at Molnar Technologies?
  7. Hemirunner

    WTB Wanted R1 block

    Got a 48 degree 4 bolt R3?
  8. Hemirunner

    FOUND RB pistons

    The set I have looks to be a cast replacement set with no valve reliefs and measures 4.347 for .003 piston to wall at your bore. You’ll have to keep looking.
  9. Hemirunner

    FOUND RB pistons

    I do understand. A +.030 over piston doesn’t (technically, shouldn’t) measure 4.350. That’s considered the nominal bore diameter. Where did you measure the skirt diameter at on the piston?
  10. Hemirunner

    FOUND RB pistons

    The diameter of the skirt will be based on the piston material and the piston to wall clearance intended for that material and application. If you’re at 4.350, you’ll be fine with anything made to run at that finished bore. A 2618 alloy forged will probably want .0040 to .0045 clearance. A 4032...
  11. Hemirunner

    FOUND RB pistons

    I think I have a set that are press pins on good 906 rods removed from a great running engine. I’ll do some looking yet this weekend
  12. Hemirunner

    FOUND Cylinder Heads

    I have two sets of bare 906 castings. I’m in Peoria, IL.
  13. Hemirunner

    FOUND Cylinder Heads

    What head are we talking about? Iron? Aluminum? Stock style? Raised port? Indy? Edelbrock? Performer or Victor?
  14. Hemirunner

    WTB 4.360 Bore Forged Pistons

    i’m Looking for a set of 4.360 bore forged 440 pistons. New or used, stock stroke or stroker pistons. Let me know what you have.
  15. Hemirunner


    It looks like a discontinued grind but the specs are out there to grind something similar.
  16. Hemirunner

    WTB WANTED: JUNK 426 Hemi Block

    The one I’m currently using isn’t that bad. You are correct that the motor mount threads are 3/8”. I would think that even though that’s the case, it’s close enough to get the job done.
  17. Hemirunner

    WTB WANTED: JUNK 426 Hemi Block