Separate names with a comma.
My rockers are marked 56+,57+,67+,76+,78+, no special order ,are there some over or undersice rockers on the market never sean this before ?
What is the max and min. valvestem installation hight on stock 906 hads ?
The engine is out tok the heads off for to bee suare nothing bad was brewing got the heads back today the shop found nothing wrong so thats were i...
All that chekt 3 set off plugs in so do you hawe any coment on my initial question regarding LIFTERS ?!!!!
Well thats where i am now changed the whole ignition system miss still there !Exelent komp on all cylinders !Miss is there thru the whole rpm...
Does a bad lifter make the engine miss like a missfire or bad plug ?Anyone had trubbel whit lifters not holding pressuare but not making noise ?...
Im thinking lifter wear the lifter wont hold presuare the problem is i do not know how long the lifters have run .I hawe had liftersets taken off...
Pulled the engine all stock 440 for an oil leak issue heads off started to push down the lifter plungers of 16 lifters 7 was soft the other 9 rock...
[ATTACH] Ok boys I hawe remowed the outer carbs the vacuum is 19 at 900 rpm idle skrews 1.5 turn out !BUT I can turn the skrews all the way in...
Does the six pack dist. hawe stiffer springs than a standard dist. ?
Explain this to me if i go upphill the problem goes away on flat road it comes back ?Under load it goes away steady speed it comes back ???
Just asking what are your six pack engines vacuum at idle ? Mine 16 hg at 12 btc. 750 -800 rpm.
This one arrived today also got the lifters and valvetrain back in dident make startup today maybe tomorrow .[ATTACH]
I delited the video when it dident uppload !
Read this thred from start all i dun is there .
Uppload not possible here !
New wires 3 set of plugs tried Campion,NGK Delco now set at 035 .
Yes tried that !Cardon stockstyle replasement dist.