Separate names with a comma.
Find a heavy duty funnel at the auto parts store and cut it off so it slips over the end of the bar, barely. Then lube the heck out of it and...
I think I see a speck of dirt on the crossmember OldBee. :rofl:
Yup bought mine for the daughters Duster from here.
My 2 cents, replace all the front end wear parts (tie rods/ball joints/upper and lower bushings) and do the modern feel (I did stage III in Firm...
Wore out suspension parts or sloppy gearbox?I have not seen a lower control arm bushing that was not shot in the ones I have seen with the...
Dart but the same thing...[ATTACH] [ATTACH]
Which ones? The plastic or metal starter shield?
For my Civic? :praying:
I'll take her off your hands if your tired of her..... ;)
After looking at some photos maybe it does look about stock.....[ATTACH]
Are you going to make it to the HEMI show?
Ron go to MyMopar.com and get the service manual. Set them per the manual and see if that is acceptable. That looks way too high for the stock ride.
SPI epoxy primer
Call Steer and Gear and ask them what the differences are to be sure.
Thanks. I could not tell on the one end. The backing plate end was for sure.
Yep my Coronet had the red paint too.
There is an arrow on the housing. Get a service manual from myMopar.com it is explained in there.If it worked before and you put it back the...
Only gotcha is the Saginaw pump will work in both directions of rotation buy simply flipping the outer vane housing upside down. Also if you take...