Search results for query: *

I see a 67 BB k-member listed for sale about 3 hours from me for a song. Even if I had that item in my hands, would we still be recommending a motorplate? We’ve had this discussion before, Doug. But I don’t remember the pros & cons you laid out. I’m open to either, and willing to look at...

Looking for a diagram or measurements to install both R/T emblems back on my 67 coronet qrtr panels. Both qrtr panels were repaired. Need to put back the holes... Only want to drill once! Thanks.

To nobody in particular, say I am out of towner driving on a three-lane interstate, minding my own business in the far-right lane within 1+- mph of the speed limit on cruise control. Traffic is flowing briskly and everybody in my left lanes are driving over the speed limit, bless their souls, or...

OK Then... I did some looking on YouTube and found this electrical engineer that has a basic electrical course of 20 videos available. He does a good job at explaining basic electrical principles and progresses to more complex aspects, but it appears to be a great piece for folks that may be...

The answer to your question is yes. Whether or not they fit 14" wheels depends on size. 10.95" (stock A-body size) should. The 11.75" (stock b-bocy, Córdoba, size) probably not.

Why do you think that happened? I will tell you why. You searched for disc brake conversions for a car that already had disc brakes. If you would of called or messaged Cass he would of set you straight.

I believe that thicker cylinder walls are of benefit. I have an engine bored the least amount possible.

Someone here claimed to do it. I doubt it's easy because the bolts that attach the dash are under the gasket and windshield glass.

Sounds like glyptal red enamel paint. Internet pic:

I did use it on the chain, it cleaned the cruddy grease and gunk off easily. But then I pressure washed it and reapplied chain lube. You obviously want to re-lube parts that were previously lubed. :)

Old age and not doing it everyday will make for long periods of staring to try and remember!

They sometimes ground them by replacing the insulation washers with steel. No actual wire.

Exactly ....I pushed hard enough, I think, to connect and after checking for power by probing for power on the switch side of the connector I have hot power. I have the column partially disassembled now to follow power thru the switch itself.

So can you pull the dash frame out without taking the windshield out? If so, how difficult? Thx

Sweet....thanks DVW....I'll follow the power flow you laid out here and see if this reveals anything!!!

Don't use it on bike chains though, it attracts and holds sand and grit which'll kill your chain and gearset in a hurry. 0

Not as good a show last night. Nothing visible to us, but we did get some red hue in pictures.

Don....I think I left out a crucial tidbit. I can start with a remote start switch under the hood and that is without any worry of the neutral safety working or not. Yes, the trans is in neutral but I'm not using the 70 specific lock out device. I also have a bare post on my relay that, looking...

Those bolts were directly out of the blast cabinet, hosed off with Brakecleen.

Ahhh ....a ground lug?