Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Got both bottom sections hung after some drama. I set the sheet up against the wall and of course the concrete is wavy which caused the bottom edge to bend out a bit and I trimmed it off with a blade later on. The big deal was I wanted to use one sheet to cover the 6x6 instead of cutting a thin...
Thinking about your stripe colors, with the Torque thrust ,are you going to keep? If so maybe argent (light or dark) may look good, especially with your silver inserts in the interior.
And just to remember Bob Renton, just my opinion of course.
Axle code(s) did not appear on the tag in 1974. The assembly number (production, but not necessarily service number) and ratio can be gathered from the broadcast sheet.
I think the original purpose for that wing was to reduce the influx of exhaust into the car when the rear window is down during driving. The cleaning effect was an added bonus.
I was leafing through a Hot Rod magazine from 1966 last night. Cal Custom had a split spoiler for the trunk lid of any car. Simply drill and bolt on. Seems what's old is new again.
Well, that wasn't the best news. I thought all the coronal mass ejections were pointing away from Earth, but several of them hit Earth and caused minor damage. If intentional, this is either a hostile act, or we're acceptable collateral damage.
Or it could be the very strangest rock our...