Search results for query: *

1973-up Caliper Cores. They maybe fine as is but recommend going through. Unsure what they came off of exactly. Wasn’t getting much luck looking up the casting numbers. Can separate. $40 ea or $70 pair

The amount of work some of you are doing to your cars is crazy impressive!!! Much respect

I pulled this out of my 66 Satellite with Hemi due to a front leak. So not correct for the engine. I suspect the leak was from the retainer bolts which were not sealed, but I have polished the input and put a new seal in it and sealed the retainer bolts. I replaced the rear seal and bushing a...

Ok thanks! I had heard it won " best detailed" or something like that, I'll have to ask the body guys. They do some extremely high end work.

1968-72 “Plymouth” Emblem. For hood or decklid $45

I recently picked up a 408 stocker. After removing it from the create I started a thorough inspection of the engine. Using my bore scope I noticed piston skirt scratches on some of the cylinder walls. None of them look deeper than the cross hatching pattern. I called manufacturer and they told...

Come on over! I can always share!

Like so...

Probably the bottom. Be advised, years, 4-door, and 2-door seats can all be different. Had the same issue with the front bench in my Dart. After finding a donor bottom bench from a different year and a 4-door, yeah, the springs were different. I modified them to work. Spaced the 2 of...

How does it run, drive and sound with that cam? I built a similar 440 with that cam, 440 Source heads, 10:1 JE pistons, etc. but I don't have the car done yet. Did he supply you with the dyno sheets? That horsepower number is a lot higher than I was figuring with that cam. As mentioned...

Wish I had this problem. :lol: :poke:

I’m not aware of a list of winners on MCACNs website, though it’s not something I’ve dug around it looking for. Even hearing the awards presentation Sunday, it’s not very clear who won what, unless you know the name of an owner. The announcement will be something like- here are the OE Gold...

Or that loud annoying flapping sound at low rpm’s

If the orange paint is flaking off while sanding it, it looks like it didn't bond properly to the valve covers. As Bird 426 said, it's an adhesion issue, you need good surface prep before painting. When you re-do it, use a sanding block instead of hand sanding so you know you'll be sanding the...

OP here. I’m not aware of this. Can you please elaborate.

DVW here probably has the lightest carpeting layout in his masterpiece. I'm sure that he wasn't trying to add any unnecessary weight into his car. I think the lightest would be an adhesive vinyl wrap that is printed to look like loop style carpet, but contours to all the irregularities, cliffs...

Im thinking about ordering a set of jegs sport star wheels for my 1974 dodge charger rallye but wanted to see what they would look like on a 3rd gen charger im thinking about 15x10 in the rear and 15x8 in the front if anyone has any pictures of their charger they can post so I can see if I like...

I thought the OP was going to make spacer bars for the "dogbone" mount as per the post by another member in another thread.

Looks like it pulled the primer, adhesion issue. Blast with glass bead. Acid etch would be best. Not sure if I would primer it, would need to scuff it before paint. I would tape it, cut excess off with an exacto or razor blade, you may have to do the paint in more than one step. That paint...