Search results for query: *

My wife takes Halloween down and puts Christmas up. My favorite time of the year.

If it has the blue FelPro 8519 or 1009 gaskets on it now, that's what you should use on it. Two years ago I honed a .030 over 440 with a plate in my shop using a Felpro gasket, knowing that the customer was going to be using them when he put the heads on as I built the short block. I got most of...

Great story on the cropduster, thx for video. Frieburger and Dulcich talking mopar, probably the only 2 guys I'd listen to for over an hour non-stop.

I have one of those. They are fun to have.

Wow, that’s nuts

I did have the car up on jackstands for months in the summer and was running with the car in gear. But I can’t definitely say if I felt any vibration.

I've had 6 BF Goodrich radials blow out sitting still. All were in the 6-10 year old range. I won't buy another.

Thats right the flexplate only lines up in 1 position that converter will be spinning off centre

The original engine was a 2 bbl 383. So I’m hoping it the 5/16. But since reading some of these post, I’m going to order the 7/16 as well.

I’m thinking a little of both. I checked today just for shits and giggles and really found a problem.

Been up for a week. We're all set with everything, till the first warm day after the new year.

The car was never really driven. This guy did a ton of work and it was never driven. It hasn’t been on the road since 1984.

I am rebuilding a 1963 383. It has Early 324 heads with aluminum rocker stands. I was wondering if anyone here has used these heads with a hydraulic roller cam and adjustable rocker arms?

Words I try to live by haha!

Any knowledge if it would fit a '75 B200, SB HD 318, factory 3-spd column shift bellhousing ? Any input appreciated, Thanks...

Probably not this year...

I am looking for 2 of these guides. My passenger side is broken and the other is gone. I have the two larger metal rollers but I could use the plastic housings and the 2 small ball bearings on each one. Thanks

From the picture that doesn't even look like it's lined up with the hole. It can ONLY bolt on one way to get all 4 bolts in.

Essentially a DP4B, flipped front to back, and spreadbore capable.