Separate names with a comma.
There would be no meshing problem because the starter wouldn't touch the flywheel gear at all.I personally found this out by trial and error...
It's very tough to reverse a tranny without lots of psychological help.
Is there a way to identify a Hemi 4 speed that's installed in the car; casting numbers, etc.?
Once there is zero play, how much should the adjusters be turned in?
Custom Automotive Machine Co in East Weymoth, 781-331-6752. I recently discovered them & had a set of 440 heads done there. Brought them in on a...
And all this time you thought I was just another pretty face.
Actually, the old 392's were a true hemisphere & the later 426 had the exhaust valve had to be placed slightly offset to be able to fit between...
Lurch, what do you have to say about this?[MEDIA]
The 440 in the bronze 68 Charger. I needed a winter project to get me out of Submit's hair.
You can tell when it's running that something is out of balance in the engine. I've got to get the rotating assembly to a balance shop & they can...
I forget, concave cup towards the bolt head, or towards the camshaft?
Looking to replace the lumpy camshaft in my 440 with a stock camshaft.Mancini has a Comp Cam kit for $252.00 while the MP kit is a hundred...
Too much hair? :D[ATTACH]
Sounds like a tuna trawler to me.[MEDIA][MEDIA]
You go to sleep & don't move for 25 years & see what doesn't work when you wake up.
So, what you're saying is that even you don't trust the OP's skill level.:D
Frame rails being a couple degrees off starting at the torsion bar mount can translate to quite a bit off at the other end, both left & right and...