Search results for query: *

Sorry, I missed post #8! That's the guy.

Does someone know who the guy is that you can send your pump to to modify fuel pressure? I'm not qualified to use the search engine here to find him. Think he's from out east . Yeah, sucks to have to slide away from stock with a regulators. Have two cars with them, but they're not stock.

Do not know who it is, but someone does fuel pumps. Saw it either here or on FABO. What about an over the counter pump, non Carter? Yeah, Chinizium.

He beat me to it, I thought that the top picture had something to do with the reverse light switch 4-speed and light under the dash. The bottom for an automatic.

Okay, I won't tell you.

Want ads, or Indy swap meet. Or find one and maybe get it delivered to Indy.

I replaced mine, they are available reproduction. Are we talking about the same thing? The swing over latch? Not sure from your picture.

Got it. Thanks guys. Will post an add.

There's another way, I like the razor blade idea too. All suggested here will work.

Damn, now I may have to look for a light bar and harness. Just looked at my spare heater control, no notch for the wiring, and how does it attach?

Both #9 and #10 work. It just takes practice, trial and error. Block sanding is good, go fine, and with water for lubricant.

Come on over! I can always share!

Probably the bottom. Be advised, years, 4-door, and 2-door seats can all be different. Had the same issue with the front bench in my Dart. After finding a donor bottom bench from a different year and a 4-door, yeah, the springs were different. I modified them to work. Spaced the 2 of...

Looks like it pulled the primer, adhesion issue. Blast with glass bead. Acid etch would be best. Not sure if I would primer it, would need to scuff it before paint. I would tape it, cut excess off with an exacto or razor blade, you may have to do the paint in more than one step. That paint...

I would think so.

Worked at the Jolly Green Giant in Montgomery, MN. Got fired on pea pack for something that I didn't do. Hired back on sweet corn pack, worked in the area for creamstyle corn. Liked creamstyle corn till then, wouldn't touch it since then. One night at a Sandy's making French fries, quit...

Yeah, my non A/C Road Runner has no light for heater controls.

I'm sure that I got something wrong, as in led bulb wrong, the leds are not bright enough. I had a better outcome on another car with crackedbacks headlight harness. So I am going back to the normal bulbs.

Your looking for a bolt center of 83mm. I like Flashpower o-ringed thermostat housings. Top hose 1 1/2"? Didn't see a 45° one available, but in the site, you can ask a question. Reply in 24hrs. Yeah, it's made in China. Should be available in black and clear. I have 2 of the straight...

I'll leave mine in.