Separate names with a comma.
Actually IIR the pass side should be a little further back toward the door handle on original cars but if it works for you thats great
Propwash has an excellent thread about it and Kiwigtx is something of an expert in the matter too. He has a nice thread about it also
Great year for Bee's and great color .. I don't know the price but I think it would look great finishedHi. I'm Tallhair and I love 68 Coronet's...
Here you go :) http://bfy.tw/2QTH
It definately look like a speaker fader but looks like someone "customed" it up a bit. I think they should be on the radio bezel in 68. I have...
Would the Hog Ring pliers be useful here 69Runner?
Yep that's the beauty .. res-usable. I've read some say they used sealerI don't know why it would be a problem reusing the fluid if it was new...
My .02 cents says yes. I've always been told and read these things about trans pans and sealing- The mating surface on the trans should be...
Well whatever you wind up doing let us know how it works out ;)
Those same/similar gaskets are in use on modern mopar trannys ... check the torque specs for those
Sounds like you have some insight. Which brand or manfu do you consider the best?
what base plate and engine are you running there?Looks like TM7 intake
440 Air Grabber air cleaner base plates are shorter than the 383 base plates.Reason the 440 / RB engines are taller than 383 / B engines
Just lube her up real good and work in it slowly
Adjust your laptop screen .. pull it toward you :)
Required when the fact-ry ran short on supply of 727's and had to put a metric Canadian transmission in a US built car to calibrate it to the MPH's
The chevy orange spray bombs look very close to original to me
Hi Steve and welcome to FBBO. If you find one and check it out and I'll follow along on your buildI'm right behind you with my 68 R/T ;)
This is correct. I'd get the 440 base plate. I've been using a 383 base plate on my 440 and it's really tight and hood wouldn't close so I had...