Search results for query: *

So I finally got the thing fired up yesterday and now it is time to get everything buttoned up. I am missing a few plug wire holder doohickys and I am wondering if the enclosed pic is the proper one to get from classic industries? MN2224 is the part # that contains the connectors/fasteners...

I was looking online for a new ignition module. When I fill out my car info on several parts sites, it says it will not fit my car when I select what I believe is the correct module. Mine is a 5 pin module(see pic), but the sites seem to think it should be a 4 pin module? Any input would be...

Enclosed is a picture of the wire. It seems to be a ground and it is in the harness that contains the wires for the windshield wiper switch. I don’t see anywhere on the switch that looks like a tab broke off, but who knows?!

Folks, once again I come here to seek advice. Hopefully at some point I will actually be able to help as all of you do. I am still working through a few issues with the wiring. Today’s effort is in and around the fuse panel. Enclosed are a few pics that show a red wire from the relay mounted the...

Ok, Not sure if I should be calling it the switch or the relay, but it is the aluminum box under the dash along side the column that contains the rod(s). See picture 1. My issue is the little screw that is supposed to let you adjust the relay module I guess? Mine either has the wrong screw...

So I have kind of an interesting setup here with what appears to be a completely stock ignition setup with the exception of an MSD distributor cap. The first two pictures show what is not hooked up from the factory wiring harness. The third picture shows the two wires from the factory harness to...

Enclosed are two pics, I’m trying to figure out what piece I need to cover the side hinge. The one I have does not fit.

Any idea where these go? No even sure they are for my car, but they were in a box when I received the car.

So back when I first got the car I purchased factree repop plug wires. 440 engine, but it has a MSD dizzy. Not thinking about it, I am finally getting the engine back together and I go to plug in one of the new wires to the dizzy. DOH! Swing and a miss. The end of the plug wire is larger than...

Ok,I'm finally getting the engine back together in the car and I am trying to understand how to set up the factory breather(s), PVC etc. Enclosed are pictures showing the valve covers and holes I need plugged. To complicate things a bit I have the non-factory six-pack setup on the car. Also...

So I am trying to clean up the brake master cylinder area of the car and I was wondering if this is the original cover for the master? Please see enclosed picture. It seems to be gray? Anyone know what paint to buy for a match? Also, now that I think about it, is there supposed to be a gasket...

I’m not seeing this wheel on any of the SE’s I’ve seen? It’s a this a stock wheel for the car?

Check out the photo enclosed. I don't remember these tabs being on my exhaust manifolds, but when I picked them up from getting them sand blasted, they were in a little plastic bag? No idea what they are for or where they go? Also, when I took ownership of the car, the mota had AC Delco...

Folks, I had a chance to do a little electrical troubleshooting yesterday and I now have all of my windows working! I went to button up the drivers door card(s) and when I went to put the electric window button piece into the door card I realized one end is missing the clip doohickeys. Not sure...

Folks, I'm not sure the color is right? To me it is looking like a Ford color? Enclosed are a few pics.

Sorry to crash the message board today, but I had a chance to dig into the engine bay today, and I was looking at the fender tag. I noticed there was a second one? Does it really mean anything? Just has three letters on it. Thanks for any input! Kraig

As the title says, the more I read the more confused I am. I have the 440 Magnum emblems on my front fenders. The car is an original 440 car. This is correct right?

I need a bit of help on figuring out this fuel line that was blocked off when I received the car. I believe it is the return line for the original 4 barrel setup? The car has a six pack setup on it and I'm really not sure at this point if they ever had it running with the setup. I have the...

Check out the picture. Is it supposed to look like this? Seems unfinished?

So as some of you know I have a 1972 Dodge Charger 440 4 barrel car that came with a 71 Six Pack setup on it. The question I have is my car has the Cruise Control option. When I received the car, I noticed that the cable that would go to the carb was not hooked up. Does anyone happen to know if...