Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Do not fall for the 'lowest resistance' caper. Performance wires are spiral wound with a metal core. So now you have not only resistance, but inductance & capacitance in the circuit.
In this test, the lowset res wires did NOT make the most HP.
HI,
Yeah I started it this afternoon and pulled plug wires one at a time and moved the throttle and the first one I pulled was #8 and it stopped popping .. all the others no change in popping .. So #8 is my problem cylinder... I may have warped a Valve as that cylinder is right where that EGR...
I get what you’re saying, I’m not too worried about good quality heads being bad. If they are, I will send them back to Trick Flow.
I’d be lucky if my car made around the block. lol
The more of this stuff that comes out, the more I am convinced technology of the last 25 years has both made life easier, and made life increasingly more miserable with less possibility for joy and freedom in various ways.
Very, VERY few books and movies or other fiction and semi-fiction have...
Nearest dense metro area to me is L.A.
I avoid it like the plague!
I notice a lot more taxis here in AZ than I do in my local CA area. Probably cause there is no bus service here to speak of. (Maybe senior med transport, but I haven't needed that yet)
I called a cab company to find out how much...
Oh I caught it, you never have realized what I was saying about how you don’t know what you have unless they are checked and you most likely can’t fix them yourself at home. Requiring a send off. Or you just run them and don’t know unless things are really really bad. Maybe your ten second car...
I gave the suction method a try but no dice... dents too deep plus the area isn't flat enough to get my good section cup on it. Perhaps I will try some smaller ones as well as some dentless techniques.