Separate names with a comma.
sorta agree with prH but old school lobes need correct oil too
Redline used to be a sponsor- they will give you correct advice
268 comp is not a...
so estimate your quench with .028, .041, .052 gaskets
and target head ccs and resulting compression
I usually do not deck the block without a...
I do not like adding to a SN oil you can actually get less ep
use an oil with the ep built in- blended by the blender
oil changes all the time so...
are you going to mock it up at all 4 corners to check deck height, etc?
FAST type builds great idea
1.6 roller tips???
go to the B3 website and read all 4 tech articles
flat to those pistons and cut eyebrows and you have a 6 pack build 10:1-11 or so
u could even D dish them for 9:1 10
regrind the cam to...
you did not suggest to lift on that manifold did you
tell me you didn't
Sure you can get a Monarch or a Hauler
but All the crower's I've used have been custom (including reverse rotation Corvair- be sure and you limit...
I'd blow it out with brake or carb cleaner (eye protection) then put a bore scope down
it's unfortunate that you can't feel the cam turning
Isky tool to the rescue
lots of good tips
remember the core plugs in the back of the block
where the rods go should not matter unless they have oil squirters which should...
old fuzzy here but the oil passage is off the bolt hole not straight down
you pulled the bolt from the back of the engine or the front...
360 balanced flexplates are redily available like B&M if you think name brand reboxed is worth the money
balance on the flexplate instead of the...
rotating the engine while priming will also load up the lifters if they were dry or bleed them down if they were loaded with oil (which can...
are we missing something?
Crower monach is pretty mild
what now what rockers and springs
did you degree it in?
whats your cranking compression...
and a shroud
spoiler/ valence also helps
7 blade fans are available in different pitches
also clutch fans with different length shafts
the story back when I had a max wedge of the teenager who got his parents to get a MW to tow their trailer- evidently worked
then he drove it to...
gas mileage is one thing enjoyable to live with is the big reason to PD
We used to build the big chrysler starters with four fields instead of a shunt
all obsolete with the new starter
same with the big leece neville...
early 518 no question about it
you could even run the A500 42 rh
the od unit is the same so you can go t 9-10 clutches
use the Transgo spring...