Separate names with a comma.
What is the chance that someone with a 71 AVS could take a few pictures for me with maybe some scale so I can fabricate the rod that I need ?
That is the one ! Do you know if other versions of the AVS would have the same rod ?
I am searching for the fast idle rod for my Carter AVS 4968S carb. Does anyone know if the rod is the same as on the Carter AFB or a similar...
I can, and have found them online. It was not the easiest search, but they are out there. I figured if anybody here had them, I would rather give...
Anybody have the vacuum break connector rod and the fast idle rod in their extra parts bin ?
Thanks for the link ! I bought one !
Stock RB manifold #3512501
I am in the process of installing a Holley 4160 on my '71 440. So far the accelerator cable is too short. I added some small chain links as a...
Ok ! Thanks again Don
Thanks Don ! Should I go with automatic choke or is manual preferable ?
One final question on this....
Does the blocked off riser port pertain to manual or automatic choke carb ? Does it matter either way ?
Excellent !! Thank you all for the assistance !
So there is no need for the gaskets themselves ?
Yes, stock intake and heads. It looks like you get 4 gaskets with the valley pan in the kit. So there is a gasket on each side of the valley pan....
I just want to do the job once... so a decent intake gasket kit would be beneficial.Anybody have a favorite ?
All kidding aside (yes, I was being sarcastic...)
I did the google thing and waded through everything that wasn't even remotely related to a 440...
1971 Dodge Charger R/T
Automatic transmission (727)
Lighted ash tray
Full size spare...etc
Being that my car sat in the desert for a couple of years, most, if not all of the vacuum hoses/lines are gone. I need to get busy replacing them...
Yup, I got the issue corrected yesterday. By the time my rebuild kit arrives, I will have all the correct parts.
Thanks guys !
I received a 3310 yesterday (used) it appears to have 2 fuel inlets, but on opposite sides. It looks like the same bowl assembly was used at both...