Separate names with a comma.
I just pulled the plug on this past Xmas eve. I wanted to do one more year, but things change and I adapted. Luckily I saved when I was working...
Welcome from central Illinois . Nice looking car
You might want to check with Dove rocker arms.. I believe they make them for Hughes. They might be able to help.
The carb plenum (4 holes) have been machined away...not good.
It looks like a 62/3 intake ( there is a definite step) where the runners meet...
Instead of using carb spray to look for vacuum leaks, take an unlit propane torch and direct the gas at the carb base, intake , pvc valve area,...
I appreciate your time you spent looking.
Yes they are proud of those parts. Happy to help.Side note , would you have a hood safety latch for a 64 Polara in your stash that you don't need?
Looks like an early B body shroud. There are 4 little offset brackets that bolt to side of shroud and other side goes to the capsulated nuts in...
During the course of my restoration I cannot find the 2 bolts that hold the safety latch to the hood. Also the spring on the safety latch is...
Looking great . Nice work, like your paint booth setup. Thanks for sharing
Diamond Racing Wheels in Wisconsin did mine, they were spot on. Happy on the outcome.
I used flat stock 1/4 thick.about 4in wide I welded extra pieces to make a T . If you dont the flat stock will bend. I will pull it out and take...
I made a spreader bar that I hooked to my tilter. Then had a chain at either end drop straight down to motor lift points.
Welcome from central Illinois
welcome from central Illinois
You are most welcome. Good luck with your project.
Yes you'll need the pick up also. Its a MP piece, I do not recall the exact pn# for it. I know I've seen others mention in other threads on FBBO .
The mopar #971 oil pan will fit perfect Does not require any cutting and it sits up above cross member
Slant 6 on a 63-65 is longer than v8 cable. Thats whats used on a MW motor