Separate names with a comma.
I was taking apart a 67 440 HP and found this strange fitting. Has provision for a sending unit and a mechanical gauge. Is this a stock piece?...
b4 bucket seats
w6 built for Canada
25 drip rail moldings
30 body belt moldings
78 wheel lip moldings
A1 2:76 rear ratio
Could be an offset used for bench seat cars. Do you have a close up of the bracket? I just saw a thread on it. I will see if I can find it.
The base on the left has a very pronounced bump setting it lower on the carb. I think you have the one on the right! You should be very close to...
looks like a 67 unit. Two different air cleaners,take a look!
[ATTACH] Factory race hemis
[ATTACH] [ATTACH] [ATTACH]
It fits a Big Block. Here's one on a 440[ATTACH]
Welcome! im in NYC also and a bunch of Long Island guys also
This was on Moparts[ATTACH]Has a floor shift and a column shift!!
This was one of the pictures from the ad.
[ATTACH]Has a floor shift and a column shift!!
No one said Dukes!! [MEDIA]
Dive Angry [MEDIA]
Heres an oddball, "Shafts Big Score". Filmed near my house long before the area was developed. [MEDIA]
Picked up two 1973 340 blocks. I cant figure out what the identification numbers mean. Both are January 73 castings. The black motor appears to...
Cant go wrong with either! Picked this up in 1985. Paid $3800 for it at Carlisle. That was a lot back then, but I wanted a clean body with...
Check out the original steering wheels in the B&W photo!!
oops! i didnt see anything that said stroker, should have checked compression distance
Dodge simulator! could use those steering wheels!
Take a look at this, pretty wild!!! https://hudsonvalley.craigslist.org/for/d/saugerties-1969-dodge-simulator-used-in/7067764158.html