Separate names with a comma.
If you put a stroker crank in a regular engine can you use existing rods and heads? Would things bang into each other?
I found a car I like but it's weird. It has an AT and I would like a 4 speed. What all does that entail?
Let's use Eldebrock SBC since they are the easiest example.2701 $144.
I see dual plane intakes ranging from $150 to $450 sometimes from the same manufacturer. What can be so different?
Okay maybe it was 60 and 100
We took the Mopar with the 360/408 stroker motor to a racing shop about 10 days ago. It was falling on its face after about 3500 rpms and making...
We have a 408 small block that having some issues. My friend is telling because I don't have a choke on the carb, and by pumping too much gas on...
Where in the world would I find bolts for such a specific purpose? Exact length, size, strength, pitch and possibly left hand threads?
Here's a better picture off the internet showing them tight. You can click all of them and get a bigger pic.[ATTACH]
The used 3.91 we installed a few years back started clicking real bad. We haven't put but a couple of thousand, albeit hard miles on it. We know...
Damn right it's pop. I'm from Kansas, soda sounds like the carbonated stuff they used to put into ice cream sodas.
It's a 391 Suregrip
Forwards or back if you're turning it seems like it binds up and then Pop. Anyone know what this is?
It wont budge. It's out of the RV where it sat for 17 years. I'm hearing a bunch of advice. Marvel Mystery Oil, Diesel fuel, WD 40, something...
I've always wondered what blueprinting meant.
I know this is a Mopar forum and my Mopars are running pretty good. I just wanted to ask some basic questions about an American V8s. My son has...
We were in the same boat. Then my friend found about 5 of them. Shoot me a PM and will will tell him.