Separate names with a comma.
12.5 pistons have valve clearances machined on the domes. Top has a flat to clear plugs, if using an extended reach.
426 hemis didn’t have quench and they ran ok!
WOW! 17 posts so far. Truly a heated subject!
Call in an expert.
Take them to a shop and ask to see what iron they have welded!!I knew a welder at work that had 30 years experience. He could...
Appears one got sold.
Lowered the price for remaining units.
Wix makes Mopar filters, but to a higher standard compared to over the counter Wix filters, especially for water retention.Of course, MoPar...
Back then, they recommended straight 30 weight for "racing" use.
Oil today is much better.
10 PSI per 1000 rpm, per Chrysler Engineering - Direct Connection manuals.
I have some #2 case, 8 3/4 center sections with various higher ratios to sell.
Before I list them for local sale only, thinking of maybe also...
He can make Nascar cams, too.
Upper rear shock mounts. I have seen air shocks tear them up.
Good replies. Open the holes on both ends first with a chisel - hammer.
Now, to find a local parts store that still has a hot tank!!
What's the best way to remove the hardened deposits in a heat crossover?