Separate names with a comma.
Swap your vacuum advance to ported and see how it runs. There's no reason for you to have 30° advance at idle.
Be careful with any taller covers if you're running HP manifolds.Personally I would just detail the stamped steel covers and call it a day. I...
Whatever you do, if you paint any panel off the vehicle ensure it is laid out in the booth the same way it will sit on the vehicle.
Zinc Oxide primer for bare metal then your epoxy/build coats over that.
Is the distributor clamp bolt tight?
I suppose I'm not being clear. Fram and Wix both manufacture filters which include return line nipples. If that's a route others wish to take with...
Fram and Wix both make return line filters.The system I am installing this weekend will include a Fram G3606 mounted directly above the...
Year One cast aluminum Rallye wheels.
These ones have had the centers powder coated.https://www.yearone.com/Product/chrysler-b-body/mrw178slv
You may, POSSIBLY, be able to find a welder who is willing to do a high nickel welding job with the engine still mounted. This particular job...
You should be using the idle speed screw to adjust idle speed.
Good luck Beater.
Try to take it easy brother.
I'm fairly certain that wire is part of your forward light harness, middle position of your bulkhead. I can clearly see the M&H decal on the...
I usually just give it a shake. If you feel/hear it rattle it's operational.
I want to say 16qt. but I'm not 100%.
I signed up with Amsoil for their "preferred customer" program. Bought a case of the Z-Rod and two Wix filters for $150. Basically $75/oil change....
Amsoil Z-Rod 10w-30.
You could probably track down a set of the HP '68-'69 manifolds on here and restore them or order a set of the reproductions from Year One (around...
Love my doggies![ATTACH] [ATTACH]
Coil could certainly be the culprit as well.
Absolutely. Gremlins often do.