Separate names with a comma.
This was two days ago so now do I have to lightly sand the color coat then the clear? If so what grit do I use? I'm pretty much a novice in the...
Looking for a rust-free socket housing can be refinished. Checking mine for wire length.
Does anyone have a decent one?Thanks
I have a shroud so placement of the radiator is important what's your take on this?
Here is my email email@example.com
BTW I'm in Toledo six blocks from Mi.
The original radiator frame mounting holes are approximately twenty-five and three quarters apart. Am I going to have to cut this frame out to...
To slightly change the subject I have a new throttle cable for the Hemi B Body. Fifty bucks including shipping if interested.
Contact Paypal they have helped me get my money back. As far as you motors I really don't know but in my view, if he's in another state he's...
Thanks for your input.
I swapped a 383 with a 440 in a 69' Coronet and had no throttle linkage problems. I just find it funny the supplier didn't list a 440, and neither...
Does anyone know the measurement? I have been told it's 21.5". Would the above engines use the same cable? I found a 66' 383 but the ad doesn't...
How did you make out? What was the measurement of the cable?
Year One has one for a 66' 383 could work on a 440? 21.5"https://www.yearone.com/Catalog/chrysler.b.body/air-.-fuel/accelerator-cables/big-block
Checked AZ last night and they carry no such part now.
Years ago I swapped a 383 for a 440 and there were no issues with the cable but that probably was one with the square plastic firewall end.
Small block cable is 19 3/4 total length
Stock big block 440 is?
Stock Hemi 426 is?I thought I read the 440 and 426 are the same length?
The materials he's using are flashed on the upper left corner but not everyone would understand it without looking it up. Question about a source...
Will, it fit my 67' B-body with a 440?? Haven't talked to the seller yet."1971 E-body radiator part number 3443972. $100"
Bought a used bolt in set epoxy painted them in black. One improvement I made was to the rear mounts the bold holes were dimpled in towards the...