Separate names with a comma.
Those front bumperettes should be saved off that wagon!
Thanks for your post. My factory set-up was retrofitted from another parts car, but never really worked right. Then the heater core sprung a leak....
Nothing says " Race me. I dare you. " like a '63 Dodge. Those thrusting headlights are so aggressive. I ended up with '64 Dodges, but missed out...
What is really weird and kind of backwards is that Chrysler put drain plugs on transmission pans until 1963. When they put the filter inside the...
On the latch there is a small diameter roll pin that you have to carefully drive out with a small punch. The top hinge has a visible screw to...
Sled City in Ohio.
Thank you. A very tidy installation, but more custom than I intend. Very nice looking underhood area.
Thanks Scott. That would be great. I did underhood measurements of my '64 Polara vs. my '67 Coronet, which Vintage Air offers a kit for. It is an...
I live down near Port Bruce, just a few miles from Sparta Dragway. Where U at? Sending a picture of a '64 I took at a show near Cayuga. Motor is...
That is a great looking car. The red contrast paint really sets off black paint job. What are you packing under the hood?That is a great looking...
Thanks Scott. What model of evaporator did you use? Did it clear the glove box, or did you have to modify it? What did you do with fresh outside...
This will not work for me because my car has factory console that I wish to retain. Canadian 4-door hardtop with factory byThis will not work...
I would like to hear thoughts from the All-Knowing Mopar Forum on adding aftermarket air conditioning to my 1964 Dodge Polara. I once installed...
I had a set on my '64 Polara, and the manifolds fit with no problem. I also ordered the front exhaust pipes that would fit the manifolds, such as...
I had same problem with my '64 Polara 4-door. Mine has a wider piece of trim that drops down over that top character line. Like your clips, they...
I put 2 X 4 in a 426 Street Wedge. The motor had later '452' heads and Mopar Performance cam; around 280 duration and .480 lift. The carbs were...
You have to have a radiator with slots in side straps to accept mounting brackets for this. Not all 22" rad's had these.
I once had a U.S. Polara 4-door hardtop as a parts car. All the inside roof trim,plus mirror and visor brackets were chromed, while all this trim...
I wonder if a graphics place could replicate this?
This tail light set-up with 3 lights on a small backing plate was used exclusively on Canadian Dodge 440 series. However, I have a fall 1963...
