Separate names with a comma.
What does "performance" mean to you? Power?The non Califorina 67 440 AFB, 4326s and 4327s, are very good carbs. They are 1-11/16" throttle...
I'm no air clean expert, but here are some observations:1) The 440 Performer is 3/4" taller than the factory 178 intake 2) The original GTX air...
It did make me laugh. I was 99% sure you were testing us.
Are you just messing with us?
It's just does not seem right continuing the discussion. I appoligize to the OP, Rumblefish and everyone for my part of this discussion...
Very nice.If you get a chance, pick this up.[ATTACH]
The OP asked if he could drill or shave the AFB counterweight because he wants to effect a change. I said yes. You recommended against it for no...
The counterweight is not aluminum. Irrespective of the material, do you really think it would be hard to add the weight back in? I can think of...
Funny. You wouldn't change the counter weight on an AFB, but the carbs by Carter that followed all came specifically designed for the owner to...
The low cylinder pressure puts things in perspective. Someone has been inside that motor. Do you know any specifics about the cam in there now?...
Well, this is totally incorrect.Looks like Offenhauser still makes this intake, or at least sort-of, and it still needs an adapter for any carb...
I don't think anyone answered your question, but I didnt watch the vids either.The answer to your question: Yes. You can change the weight of...
Posting some bolt hole to bolt hole dimensions, and throttle bore dimensions would be helpful. My guess is that some Carter, Edelbrock and/or...
The "rotating assembly" generally includes the pistons. Do you have 6 pack pistons?
There is more to how a properly adjusted choke works than just the choke plate closing.
I'm with you. There is nothing stated so far that would make me believe there is anything wrong with the torque converter itself.The idle is...
Compression ratio is an important piece of information. If the motor has the stock pistons and compression ratio, it would unlikely run on pump...
journal size, or base circle size?
Pretty impressive hp numbers for that cam
Maybe have the builder get the right damper and return the one you have.
