Separate names with a comma.
don't drink the Kool-Aid folks. i'm outa here!!!!!!!!
Chrysler says they only made 280hp. Chrysler admits to over rating the 383's. see if you can find the October 1967 hot rod magazine article where...
i was looking thru an edelbrock catalog and they have a test/graph of a 383 and 440 both with the same power package. the 383 did 421hp/417ftlbs...
383's are torque deficient. the more you cam them the worse they get. which means you need more rear gear, more torque converter and less...
I think if it were me, and you knew the short block was good, i'd do the e-street heads with RPM intake and definitely use less cam than the RPM cam.
that RPM cam would be a real torque killer in a 383; which doesn't make an abundance of torque to begin with.
I had some 1 3/4's and 1 7/8's in a '68 b-body 383 back in the day. IIRC the 1 3/4 fit fairly well. but, after using TTI's I wouldn't use hooker...
what you use for springs depends on what distributor, and other factors. I don't use the delco/msd type springs for factory mopar distributors.
all "standard" wires (OEM 7mm type) will do is add resistance into the system. they'll work.
i use them. I spray them with silicone before use. never had an issue.
I've always used studs for exhaust fasteners, even with 2" TTI headers. never an issue.
iron 440 should be around 650lbs.
if it were me i'd look at the factory type bolts/studs. these can probably be purchased from a restoration business on line. I use factory bolts...
3/8"-16 for block holes, 7/16"-14 for the two lower trans holes.
the KB catalog I have says the domes can be milled off for closed chambers.
should have a solid dome.
3spd Mystery Shifter. not a 4spd.
I hooked into the 12v side of the ballast resistor. it'll work on the run side if you get it backwards. no matter the voltage just make sure the...
I've run all kinds of voltage to those chokes. 14+ to 7. only difference was the time it took to heat up the spring. I think you can do anything...
back in the day I used to run the old sun two piece. they were fun. don't know how many sending units I messed up getting water in them.
