Separate names with a comma.
Call s and w and ask for 68 b body bars that go through the package tray. They sell them both ways.
What do you measure the main bores with to make sure of them staying in the same place? Have you ever mic'd a box of main studs?
Wouldn't you have to hone the mains with a bolt/stud change? Rod bolts I can see to a point. If using stock rods it's hardly worth reusing them...
There are many, many hardware manufactures in the US aside from ARP. Anchor, Atlanta Rod, Kerr-Lakeside, Monroe, Chicago, etc. I had a project a...
Texas industrial electric has what you need.
$2600 for the heads, $1000 carb/intake/valve covers, pistons/ronds/crank/bearings $2000...did they get all of the machine work, water pump, etc...
Another question....how are we worried about a race? You won't hook anything up around here for 2-3 more months.
Did you pull any bearing caps to see what the mains look like?
Agreed. I love original stuff however as said reliable HP that comes in a package is cool. My 68 GTS has a cable drive tach and an old school...
I completely disagree. Hellcat swaps are awesome.
Usually the bigger wheel has a larger axle and supports use of a bushing. Did you decide on lifters yet? That $1100+ price tag is hard to...
If I would have stayed around WI and not moved to BFE Oregon where we only have drag strips and tiny ovals tracks my hobby would be road racing....
And note the pic above has the slider on the chassis (lowers the ride height) *and* the front spring eye is in the top hole. This is a good...
I think you will be fine as long as you don't hit the RR tracks at 90mph.You want to keep the spring oriented so it is somewhat level front to rear.
My zero deck 511 has .041 Cometics. 400 block 4.375x4.25 w/ 6.535 rod, -12.5cc dish Diamond pistons at 1.32 CH. With ported Victors it came out...
Step 1 : Use a 400 block.Step 2: Trick Flow 270sThe rest is more or less dependant on where you want the power band.
It appears that the lash cap is riding on the valve locks instead of the valve tip itself. Can you verify that the lash cap is in contact with...
The bleed numbers are the hole size in thousandths. Pin gauges are precision "pins" used for go/no-go on holes. You have to be careful if buying...
IMO the benefit of tubular control arms is positive caster and maybe some weight savings.If you want things to move easily use greasable LCA...
I have had air bleeds that were incorrectly stamped. We always pin them now. For the jets I check them and if they are close that's that. Refer...
