Separate names with a comma.
I know I looked it up once before however searching didn't work out. Can anyone confirm the upper and lower radiator hose part number for my '66...
https://www.mcmaster.com/hose-clamps/constant-tension-spring-clamps-for-firm-hose-and-tube/
A/C or non-A/C car? That will make a big difference.
And the blower motor:[ATTACH] [ATTACH] [ATTACH] [ATTACH]
The FSM is a good reference for all things heater related. It's very easy to read and will provide you with an understanding of what each function...
Now is the time to remove/clean/rebuild/pressure test the heater box and core, remove/clean/replace the under dash insulation, and remove/replace...
I hate Stant Superstats and have also had sticky Mr. Gasket thermostats as well. I'd get a normal Stant and drill an 1/8" hole in it to help...
440 source sells a thick water pump gasket to solve the scraping water pump impeller issue. I'd have to see some pics of the pulley issue to have...
I use and electric sending unit that is screwed into a bung welded to the oil pan. You would be amazed how long it takes the oil in the pan to...
If you trace out what function the terminals have it's pretty easy to retrofit the five button controls with later b body unit from Napa or...
Get the snap-on pliers and life will be good. Also note that the original size clamps are often one size too large for the heater hoses and...
As far as I can tell. The one that came to my door did NOT have the MP casting number this time around but it is made in USA/Canada and identical...
Here is the cheaper alternative WITH a MP part number:http://www.summitracing.com/parts/cvs-7426/overview/Some careful shopping can get you...
Make a piece of wood in the shape you need and then bust out the rubber mallet and form the aluminum around the wood. You might have to do a few...
From what I can remember that switch is used to bypass the heater valve bypass during max A/C or something like that. The factory service manual...
[ATTACH]I heated the drain tube collar things up and lightly tapped on them. You may have to soak them and also note that there are tabs on the...
The A/C core is totally different. If you want I can snap a picture of an A/C and non-A/C core for comparison in the next day or two.
Napa can sell you a rebuild kit. When you have it tested make sure they do not exceed 25 psi or the valve will start to disassemble itself....
