Separate names with a comma.
If your replacing the cam too , why would you go with anything but a 3 bolt cam if you can get one, the center bolt cams have either a woodruff...
distributors are fairly inexpensive why cobble something together the bushings are probably sloppy , is the shaft worn, will this fit that, on and on
looks like someone wanted a duel point in a later vehicle and frankensteined it
Ported was invented to try to beat the emissions requirement at idle with regard to NOX.EFI solves most of the problem when it comes to...
so your saying port vacuum was invented after emissions came out in the 70's
This is why I love this site. I bought my roadrunner running and looking like the engine had recently been gone through, it obviously has a large...
[ATTACH] It may sound silly but did you lube the contact heel and cam Sometimes it’s just the little things
You might try a distributor that’s not made for vacuum advance if your not going to use it
I think it’s in your distributor, sounds like your plate is moving around
are you running a vacuum advance Make you a line with a T so you can put a gauge on I had a dirty carb that screwed up my vacuum
my nephew had an ignition problem running fine then missing running fine shutting down he swapped out distributors, carbs, coils msd box's,...
fuel is easy just look in the carb with the choke wide open and pull the throttle back you will see it squirt in, now spark that's pretty easy too...
