Separate names with a comma.
Boy, do they ever! When I restored my other 64 Sport Fury, I had to buy stuff from all over the place. I'm getting much of what I need in one...
Thanks for that. I'd not heard of Detroit Muscle before. They do have a kit with many of the front gaskets I need, as you said. I've used Joe...
Thanks, I'll do that.
I'm starting to disassemble my 64 sport fury for body and paint. I took off the inner fender splash guards from the front fenders. there are holes...
It worked perfectly. Thank you very much
THANKS!! I will do that.
I'm really struggling trying to figure out how to get the eyebrow trim off of my 64 sport fury. As you'll see in the photos there's a slide clip...
That would be very much appreciated! Thanks in advance./Butch
Do recall if you used round or square stock and what thickness?
Andy, I did my best to copy your lift plates. Now, I'm stuck again. My engine lift bar is about 21". It looks like the diagonal measurement across...
Okay...thanks! /Butch
Thanks for that. Very helpful./Butch
Andy, can you provide a link or source for those lift plates? Thanks! /Butch
Thanks for that!
Not associated to the issue, but thanks for the linkage pictures. I have a 383 with a goobered up kickdown linkage. These pictures help. Also, I'd...
I was hoping not to remove the carbs, but if that's the best option, that's what I'll do. Seems to me it could be difficult to balance the weight...
I have a complete 426 MW sitting on a pallet in my shop. I need to attach my engine lift to it so I can put it in the car. Where are the lift...
