Separate names with a comma.
The U joint actually started to harden up. The yoke actually started to freeze in one position. I could hardly move it back and forth. Never had...
I looked into my paperwork and I did replace the front U joint. I used a cheep one that did not have a grease fitting so I could not lubricate it....
Thanks for the reply, but I already tried putting another set of wheels on the front and it did not change things.Thanks for the info, but I...
First I must say I have replaced most everything on the front end of my 72 Plymouth SSP. Upper control arms, shocks, Ball joints, tie rods,...
Good job. Many put down a clone or tribute car, but most do not know what a real Road Runner is. The VIN does not tell you it is a RR unless you...
Hi, I am 70 and did it myself. Spray around the place the speedometer cable goes on, not just in the hole the cable goes in. It has been working...
As several have mentioned. It is easier if? What are you wanting to do? If you want to change the big K member bushings, yes out the bottom. If...
Yes it made that noise. Been working fine for months now.
My speedometer started jumping. I know they do it after many years, since the bushing wears out. I pulled the speedometer cable out of the gauge...
As I stated, the teeth were much different. So I do not think defective starter. Totally different Teeth.
My starter is starting to go out. Not bad for what 48 years. I got a rebuild one from Amazon, WLS 3250 BBB industries. It sure is smaller and...
Oil pan was the biggest problem on the Aspen. If you want, I will ask the owner what he purchased. I did the work. The 400 was a strocker. Nasty...
Question. When I was looking at 73 Roadrunners NEW, The dealer did not have the color I wanted. They said they would paint the car any color I...
On the Orange 72 Clone, the owner put 15X8 Aluminum Mag 500 with 295 series tires ALL AROUND.
This is just some information for you. I had an 83 Dodge Mirada with a 318 in it. I put a 400 in it with standard motor mounts that I think came...
My 71 Roadrunner had a rubber bumper strip across the bottom half of the center bumper. You can just see it in this picture. I put a...
A very important set of wires are the two that attached to the top of the rear roof that clip to the last bow. when installed they hold the last...
I have been working with my Friend to turn his 72 SSP into the greatest RR Clone ever. The car is now painted. Orange with gold tint. RR Hood, New...
I got mine from Rock Auto and it was fantastic. About $99.00. I have had in on the car for about 4 years in Reno, NV and no heat problems. Fit...
OK my bad using terms that may be wrong. All Mopars I have owned require, NO VACUMN at idle to the distributor.
