Separate names with a comma.
I hear you, the metal ones rusted away or studs broke/stripped etc. You would think that someone would be making them - I found those 3-1/4" when...
I have 3 - 1/4" plastic they went on w/rivets or screws @ 2-1/2" spacing C /C - so far - I'll keep looking for metal, I have soo much shit
I might, try to remember when I get home or in the morning
Looking for a nice column for my 65 Coronet, P.S. - floor shift - tilt - w or w/o key, don't need wheel - if it's my lucky day I'll take tilt /...
I hope it works out well for you, I've seen alot of people cut corners and it never pays off , do the machine work correctly the first time -...
You want your engine to run right ?? & not take it back out/apart and redo again ?? Well, since it takes $$$$ , time , expertise , greasy busted...
Cool, give it a good once over, since you have it out and you'll be moving up to serious HD - good luck
My 65 Coronet, I took a complete setup of 11x3 brakes off a New Yorker[66 ?] donor for my original 8-3/4 rear , everything bolted right on, no...
Helping a friend w/dart sport, ordered a spring relo kit & torq bx's 2wks ago , sitting in shop now, showed up in 3 days ! - I wouldn't panic !...
Good name brand electronic parts cleaner / non- chlorine brake clean , spray on clean white cotton cloth & dab grease spots - go slow, do not be...
I've done it before myself , just be careful and it will work just fine , I will still keep an eye out for others when I get to that container of...
65 Coronet 440 deck lid - a few pinholes front bottom but very usable , not bent up , Pittsburgh Pennsylvania area - $35 PICK IT UP ! Don't want...
I have a 72 4 groove but it's 7-1/4" - matches up with the balancer for internal balanced crankshaft, not sure I've seen one that small, maybe...
No problem, good luck w/ the car !
- if ur still looking , I have a few here I can measure ?
- I have a couple 66 727's and can check #'s - you still looking ?
Once anyone starts cutting or welding parts onto their "original " ___ code car ! I would have to say - who cares ? Guaranteed it's not so...
I built an engine for a van project, 350 sbc- sorry ! It was a 1-Ton 4x4 project a got myself into - anyway, no exhaust out 1 side - pulled the...
If you can find a donor car from the early 70's (I used a 72 satellite I believe) - I changed over to front disc brakes using the spindles on out...
