Separate names with a comma.
You guys better read the 16 page ordeal over on FABO. I would never buy one in a million years based on this ordeal. I will never deal with Jimmie...
If you do come thru Nebraska, don't be hauling any drugs:lol:, they will catch you on I-80. Usually every week or 2 they have a big drug bust on...
There is a post over on FABO, dated Feb,3 2021, by BILL CROWELL, titled "Square-bore vs. spread-bore?". I posted pictures of the differences of...
Just make sure you get an adapter for the Thermoquad and not for a QJet. If you use a QJet adapter you will more than likely have a big vacuum...
If you would want to use a Thermoquad, you will have to use the 73 and up TQ 440 cast iron manifold.
A few years ago, at the Kearney Cruise weekend, there was a pretty nice 79 Chevy Camaro Z28. It had a Ford 292 Y block truck engine complete with...
Put your stock intake back on. Problem solved!
Explain how the original carb on the engine is junk. The 74 440 Thermoquad from a truck is a good carb to get redone. Truck TQ's have the least...
I have used a broom handle with a slender straight blade screwdriver duct taped to the end. A lot lighter than the extensions, nothing special to...
Could those be Drag Radials on the back?:lol:
Here is a couple pics of the cop car in my avatar, found it in a junkyard where it had been sitting since 1986, pulled it in the shop 6 years ago...
At least he could put studded snow tires on it! I have a ratty 67 Coronet that I've owned for 43 years. It's an original Coronet 440 with a 383 4...
Stick with Thermoquad, Just find an earlier pre lean burn one. It will outperform any Edelbrock!
I see it's a factory AC car. Find all of the missing stuff and install and be cool.
I was afraid of this-Please re-engineer your throttle bracket and kickdown linkage. For the Holley, you need the 20-7 Holley-Chrysler bracket and...
I've always heard the Hotwire in Mena AR was what you needed, for the new Hemi stuff.
I've been using Type F in my Torqueflights for 45 years, Never had a transmission failure yet.
The left mount 340-360 can come from a 71-73 C Body with 360, 70-74 E Body with 340 or 360 and B Body with 340 71-72. I have an extra one if you...
The pulleys from the 273 should work on the 360. You will have to rat tail file one hole on the crank pulley. One of the holes is offset on the...
Something to think about, I haven't seen anyone mention it yet-Is the kickdown linkage intact, hooked up, and look right, has it had a 4 barrel...
