Search results for query: *

Is this a indication of not enough grease inside the TO bearing or a worn fork? Clutch pedal feels good when pressing it down in the cabin, however the fork does not pivot backwards beyond i would guess is the midway point? Like instead of see saw action it just acts like a lever and stops mid...

Hello everyone... So got a issue where the plunger on the switch isn't depressed enough after a while as the switch mount arm bends back and it puts the brake lights on. Beyond having to try and adjust the brake pedal pushrod (if possible) and then having to adjust the clutch pedal as it wont be...

So my 70 RR is a drum/drum manual car and I got the Dr Diff conversion and stainless brakelines. What kit can i order to get all new brake lines up front, both to calipers and cross over with the disto block to rear differential. I asked Dr Diff and they responded with nothing that is really...

Looking for a set brand new if anyone has one available. Reputable brands please.

Hello again. I have another set of thing that I can seem to find or show up on ebay or the reproduction sites. From the picture.. (not mine from ebay) The studs that go into the quarter panel extension its self.. what are those called and are they reproduced or should I just try and find...

Hello everyone.. I've spent some time looking on Ebay and the assorted resellers of reproduction parts but not having any luck finding out what exactly the stud that the front corners vent window looking A frame part goes to inside the front doors at the bottom and on the front of the vent...

Hi everyone, I have a BPE setup on my 440 and its not been shifting right after I installed it.. Well turns out the trans end had popped off the ball pivot on the lever. I have gone back and put it back on and made sure to hear the click when it seats, but soon as you connect it back to to the...

Hello everyone, The paint and body work is finaly done on the 70 RR. Now I didnt pull it apart.. Is there anything besides the FSM i could get that would give me all the details I need like what bolt goes where and what kind of bolt is needed? Looking for some tips and best way to start. Thanks!

Hi Everyone, I am going to go the front end route with QA1 on my 71 Satellite. What are any gotchas or things I should do or have on hand for install of the components. Do I need or should I order all the other parts that QA1 has like the adjustment bolts and so on. I just want to buy once cry...

Hi all, Thought you may like this. The new music vid from a Charleston native Chris Sullivan. My purple 71 has a starring role :D

Morning all. So I am putting a super rusty 72 sat back together and I managed to break the fitting on that rear brake body line right at the part that connects to the rubber hose Y block that sits in that bracket. Whats the lowest cost solution for me on this? Can I just double flare the new...

Hi Everyone.. Attached is a picture of what I am looking for as I can't find out the name of the thing but its that trim piece that goes on the fake air intake/pocket spot on the Driver and Passenger Rear quarter panel parts. I am looking for a RH and LH piece. Thanks.

Hi all. I am of the thought that as long as its the same depth and width that it wont matter if the bolts are for a XJ 8.25 or a 71 B body 8.25 axle. Am I right or they different somehow? I ask because I am seeing Jeep ones that are cheaper than the ones said to be specific for 71 b body rear.

Hello everyone, Looking for a good to very good deck lid for my car. Last one is rusted out and needs to be replaced. Having some trouble tracking one down that fits the budget I am in. If any one has leads that would be helpful also. thanks!

Looking for a 71 - 72 rear end to replace a 8 3/4 SG out of a 72 Satellite. It doesn't need to be fancy just work. It can be a 8 1/4 or 8 3/4 non SG. I am interested in a complete rear. But! if you have a full housing (8 3/4) minus the chunk I am also interested in talking about it. The reason...

Hi all, Is there a book or reference site I can go to that I can use to figure out what exactly I am missing from the car and the names of the items so I know what to search for? I did order a B body restoration guide but its more of a big overall picture resto book than talking about what each...

Hi all. Was doing some research again on possible solutions to my rotted out LH B-body frame rail issue and noticed that some sites listed B-body shocktowers/frame rails as B-body & E-body for 71-74 Saw it here...

Need some other parts! Front turn signals (housing/lens) Reverse lights (housing/lens)

Hi all, Looking for a 70 RR trunk lid.. Color does not matter but no medium or more rust. Some surface rust is fine. In the Charleston area. Thanks!

Hi all, Trying to replace this cracked manifold. I have it back on but that last hole in the manifold is real deep and small.. There is a stud down there.. how do i get a nut on that? (when i pulled it there was not a nut on that stud.. and i thought it odd at the time) Or... Have I been...