Search results for query: *

Ken Stohr (i believe -socal440gtx) passed away at the end of 2022. He was in the process of making g dash panels for 68-69 gtx's and some RT's. I was lucky enough to have gotten a set from him and had emailed after the spring fling looking for another set for my 68 convertible. His wife Eileen...

1968 GTX/ Sport Satelite finish panel. In restorable condition . Chrome edges are in decent condition and should polish out nicely small blemishes throughout. Some light pitting and hairlines on the leading edge chrome, but will polish out to shiny. Has damage on passenger side that is...

1968 GTX/ Sport Satelite finish panel. restorable condition . Chrome edges are in decent condition and should polish out nicely. Some light blemishes on the leading edge chrome, but will polish to shiny. Pitting is mostly where the stickers will cover. Overall nice used 57 year old part. 500obo

1968 GTX finish panel. This panel is in poor condition.Chrome is peeling and de-laminating off the top of the panel. Maybe the GTX emblem can be salvaged. 75obo

1968 Plymouth GTX and Sport Satellite door panel Trim and panels. Stainless trim is in great condition and will polish out beautifully. Rear panels are both missing the upper trim pieces. All of these interior panels are originals, not reproduction. The front panels are in nice enough condition...

Selling an Air Grabber setup that I had stored for at least 2 decades. Includes the Left, Right, and center components of the air grabber, also includes the cable pictured. As you can see it will need restoration, repair, soft seals, etc. The driver side (LH), has some damage as pictured, with...

4 Vector style 10 spoke mags 14x7 5x4.5 bolt pattern 4in backspace very nice condition considering it's age. Includes (4) 3 spoke spinner center caps. No curb rash. 1 wheel has a small nick, other than that wheels in very nice condition 2 wheels have 215/60/14 2 have 235/60/14 tires are from...

Looking for a set of vector or slotted Mags preferably with tires that hold air to use as rollers.Must be 15 inch, can be staggered. 7 inch for front and 8 to 10 for rear, or 8inch all around. I am in southern Ca and can pickup locally preferred, but will consider paying to ship for the right...

I need a small piece of sheet metal to patch my Pass side lower quarter, just behind the door jamb and in front of the rear wheel, below GTX emblem and body line. Car is a 68 GTX, and the patch sits just at the rocker moulding and in front of the wheel well lip. The actual repair piece can be...

Looking for information. im running a 440 and im going to put a air grabber and need to know if anyone makes a baseplate for a 4bbl that will work with the edelbrock RPM manifold. Thanks in advance.

Is the bezel for the sun visor painted/brushed finish or is it chrome? The visors on my car are painted/brushed, but i also have a pair that may be original to the car. i forgot which was which. I just got new visors but would like to put the right ones on. Does anyone know if that piece is...

I'm not sure of the application, Brewers has it as a 10 1/2 inch clutch , mymopar and other sites have it as an 11inch. It is for a 1964 B body. It does have the 4.354 retainer diameter. This bellhousing is in great condition with no stripped threads and no broken ears. Just needs paint. $300...

I am not sure what this shifter is out of, Looks like maybe an A body? or perhaps an early B body? In any event it looks like it is for a console car. Comes with handle, knob shifter, and linkage w/arms. It is in complete condition but needs full restoration, or for parts. The reverse lockout...

Inland Shifter for an early 68 B body. Comes with handle, shifter, boot, and linkage only. I could not find a part # to go off of. This was purchased at spring fling years ago, but I don't need the shifter . It was advertised as coming out of a charger. It is in decent shape. Shifter mechanism...

Selling A 1968 GTX project. No Data plate. Non Numbers motor 1972 440 If a member wants it Ill sell it for my reserve of 12000. It sold for 14000 but the bidder was a flake. Its a hell of a project ,but is a real GTX. Located in Simi Valley Ca 93065 (805) 732-3273...

I have a 1968 GTX. In the door Jamb are an anodized piece that is spring loaded, held to the jamb with two Philip's head screws. My question is, Is there supposed to be a "striker" or plate or grommet on the door that this piece would touch? It looks like my door has two indents or punch marks...