Search results for query: *

I have installed a hydraulic roller cam in a 440 that I am building. I have 440 Source cam button 200-1170, nylon. I have a stock timing cover that I primed with Rustoleum High Heat Gray, then baked. 440 source recommends endplay .005-010" (distance from cam to back of timing chain cover). Seems...

I am building a roller cam 440. I have a Milodon 32000 windage tray. I’ve not purchased an oil pan, oil pump, bronze gear roller cam oil pump driveshaft. I am putting the 440 in my 1966 Coronet, stock suspension height, stock suspension except 1” torsion bars, possibly upgraded but stock...

LSS&B added a new event: 2025-09-20 Tidewater Mopar Madness Read more about this event...

Hi. I went on the Event forum to post b-body pictures from a local show. Message: "You have insufficient privileges to post to this forum" appears at bottom of screen. I wanted to share pictures from an event that already occurred. Note: I can post event threads on FABO and FCBO. How do I gain...

Received build card for my 1966 for FCA/Stellantis. Plant VIN code 7 does not match Plant code 1 on radiator support Production Date 412 does not match stamped numbers 525 on radiator support Shipping order 08082 does not match stamped numbers 09046 on radiator support. Should stamping on the...

Nick's Garage - Jack/Jack Hook Identification I copied these pics from the link above. Handy if you want to match your bumper jack to original, Thanks @ply64post for posting the link in an earlier thread! Here's what I have. Guessing it's later vintage. Is the shape at the top of the bumper...

I received this big block V8 rear main seal retainer with narrow side seals in a box of parts years ago. Has a PDDC logo and last 5 of casting number looks like 21389. Is this from a later factory big block? Or is it something MP produced after big block V8 went out of production? Thanks for...

Trunk lid: bought the car Jan 2025, with trunk out of alignment. Previous owner had car for 8 years and never tried to fix alignment. PPO, no contact info. Right side needs to move 3/8-7/16 to front of car Left side needs to move 1/8 inch toward front Up down adjustment is OK I am at rear of...

My 1966 Coronet has front seat belts, but no rear seat belts. These front seat belts have no factory markings, except a possible date of 07-15. I guess they are afternmarket. Can anyone provide manufacturer name? Thanks

1966 Dodge Coronet, 2 – door Sedan, OEM windshield upper inside trim clips I want to buy these OEM clips because I need to install a new windshield in my 1966 Coronet 2 door sedan. Before I do so, I need to set up clips for the inside upper trim to screw into. I borrowed the 1st 3 pics from...

When I bought my 1966 Coronet 2-door sedan, all the windshield trim was off the car. Does this piece install partly under rear view mirror? Picture of how it looks installed would be great! Thanks

7 of my 8 instrument cluster light sockets are good, but 1 socket has a broken black hold down clip, so it does not maintain good contact with rear of cluster. I think from reading an older post that it's a T10 twist lock socket for a 5/8" hole. Where are you sourcing these sockets? Went on...

Mickey Thompson M/T small block LA engine valve covers, aluminum. Straight and in excellent condition. Great way to stop leaks from 50+ year old stamped steel valve covers that have been bent, over-tightened. I bought them to replace the valve covers on a 318 V8. I never used them because I...

First off, despite the directions in the factory shop manual, you do not have to remove the glovebox hinges or door to install this glovebox liner Glovebox kit came in two parts, upper and lower, with five screws and no directions. I used 4 screws that were spares from my screw box to assemble...

For a 440 V8 in a 1966 Coronet 21 body, what is correct negative battery cable length? Classic Industires lists 15 inches, 23 inches, and 25 inches. 15 inches is too short, but which of the other 2 lengths is correct? Are they measured bolt center at block to center of battery post? Thanks

I got the following estimate from a local machine shop. I am not going to buy anything from Comp Cams. Other than that, what do you think of the costs? Thanks Ballos Estimate Quantity Price Total LABOR Assembly - Hourly 5.00 $125.00 $625.00 Clean & Magnaflux Block 1.00 $175.00...

1966 Coronet Steering Linkage, Right Side Tie Rod is loose on inner and outer tie rod ends. Left Side Tie Rod is loose on outer tie rod end, but not inner. Slots at the end of the tie rods have an oval shape rather than the straight slot shape that I'm used to. Tie rods get narrow at the...

I need to remove the hood on my 1966 Coronet, 2-door sedan. To mark for proper reinstall: Is it enough to scribe the washers of the hood hinge bolts? Or do I need to scribe the hood mounting surface for set up of hood hinge assembly? If so, where are places I need to mark? Thanks! Ben Left Right

I have been having to use Firefox to browse FBBO, because Google Chrome gives me slow speed and regularly locks up the screen for a few minutes then unlocks it. Is there a problem with the FBBO website's compatibility with Google Chrome?

2 questions: 1966 Coronet Deluxe 2-door sedan, pump premium street performance 440/727/8.75 with 3.23 gears planning stage. Would like to run a factory air cleaner, but that is not mandatory. Do not intend to drag race. 1) Are the 2206000 1966 4-hole intakes or 2806178 1967 4-hole intakes OK...