Search results for query: *

Hi all, I am running a 440 with a newly installed MSD Digital 6A, Pro Billet Distributor, 8.5mm wires and stock champion spark plugs. I want to put in a higher stall converter so it would really help to know the cam. The guy I purchased the car from told me "mild purple cam." Well that could...

Stock 440, stock exhaust manifolds. I'm sure you have all dealt with this, I am installing a Denso Mini starter in replacement for the factory starter. My cable to the battery and ignition comes down and is in a clip that holds it to the wheel housing. I took the cable out of the clip on the...

Hey guys, I put a electric choke on my edelbrock 750. I am attaching the red wire from the choke to the ignition but there are 5 wires to choose from. Black, gold(yellow), dark blue, brown, and red. Any suggestions. This has been keeping me perplexed all afternoon. Thanks! Chris

I have a 440 with a 750 edelbrock sitting on top. Cam is a 434 purple cam. no roller rockers. Heads were rebuilt, bored 30 over. Anyways. I was starting the car up. It hasn't been fun getting it started this year. Anyways, I put new plugs in and it fired right up. Then I started it again. Fired...

I am about to put the heads back on my 440. It's not a racing engine it's pretty stock besides a valve job that will give me a few extra horses. Are there any gaskets that I should look at specifically? Or just get a FELPRO Performance gasket?:spam4: Chris

Are 440 Exauhst bolts all to the same length? I am repairing the head on my 1968 440 heads, It has exhaust bolts that are all the same except the one in the front by the fan. All are about 3/4" sticking out of the head and the one farthest foreward on the end is almost twice as long. is this...

Hi, The previous owner did not have the cam card. I have the heads off and they are on their way to the machine shop. The Machinist wanted to know what Cam I was running. I wish I would have measured before I took the heads off. I'm new at this. So I call up the guy I purchased the car from...

Sorry for the mispel I am trying to remove the exhaust manifold and the shop manuel was no help. Do I have to remove the studs from the head to get it off? Two of the studs are down holes in the manifold and the other three are exposed. The Manaul just says to remove the nuts and remove the...

Hi! I just bought a 1968 Dodge Charger 440 RT in Avon Ohio last weekend. Has a unrebuilt Carter on it that runs like garbage so I ordered a 750 Edelbrock. As soon as the Carter is plucked it will get a rebuild. The 273 rear end is a nice rear end and is fun to tool around but not laying much...