Search results for query: *

I have a 79 Magnum XE that I swapped a big block into many years ago, but also doing that with a 74 Charger Big Block K member so that it all fit the 440 correctly. Now I want to put a 6.1 that a recently acquired and although there are conversion mounts from a Small block to Gen3, I have yet to...

Perfect used 4.30 Gears for a 9.25 Mopar differential. Had them in my 79 many years ago, These OEM Direct connection and been on the shelf for 30 years. 100 plus ride

I am refreshing a set of 452 heads and I already have the 2.14 MP intakes from a while ago, I need to get exhaust valves. I was looking @ Ferrea 5000 and Milodon's 1.74 and 1.81. The plan is to put them onto a 400 or a 451 with a mild 220-228 490 lift cam, the heads will just be bowl blended and...

Need OEM leaf spring eye bolts for Late B Body 79 Magnum, Center bold on leafs with rubber ISO suspension

hope all is well and Merry X-mas and happy new year. I really need your help with Eye Bolts for my leaf springs for my 79 XE. I'm taking out the Dana 60 I put on my 79 XE years ago and also removing the S/S leafs I installed and putting back the original springs and 9 1/4 diff. I had the leafs...

Good day everyone and belated Merry X-Mas. I need y'all help with a driveshaft for my 79 XE. Here goes, originally it had a 360 with A36 package and A 9.25 diff, about 20 years ago I was into racing the car so I put a stroked big block and I found a Dana 60 from a 71 GTX and bolted it up with...

I'm doing up a 400 with a stock stroke and using a 383 steel crank, 383 rods and KB240 pistons. Will be for both cruising both short and longer runs as well as mild bracket racing so a bit of everything. It would turn no more than 6K because it has a mild 222 Hyd cam. What bearing are y'all...

This is a lightly used 3966 Autometer playback tach with Shiftlite included. AUTOMETER 3966 5" PEDESTAL PLAYBACK TACH 9,000 RPM, With SHIFTLITE. 340CND or 225USD Thanks

This is a Cope transmissions CRT-22X Reverse manual valve body with low band apply for added safety. It's brand new just taken out of box for pictures. 450CND or 325USD OBO

Brand new Custom grind Solid Flat cam. This is a fast rate of lift cam speced out by Hughes and cut by Howards. Changed plans went different direction Specs are listed on the card. 300CND or 225 USD OBO

These are new Schumacher 73 and up Small block to Big Block conversion mounts. They have been checked for fitment, never ran. Changed plans so don't need them anymore. Schumacher has been out of production for a while and to find a new set is practically impossible. Priced very reasonably 220 USD.

Hi I have a new set of H/S rockers and when I install them it's got no more than 5 thou side clearance, I called Randy and he said anywhere from .015 to .020 is fine. H/S supplies .047 shims. According to my calcs if I find a .040 it would fix the issue. I did a search and found .015 from Mopar...

Looking for a few spare rockers in good shape to complete a set I have, I have 1 broken rocker and would like to replace it. Even a NOS set I would take

Hi I got new Comp cams 1621-16 steel rockers and was going to install then on my TF240 heads, I already have the rocker studs from TF. I installed them and they are very tight side to side and not exactly centered on the valve tip. I was thinking of either getting a smaller center spacer...

Hi I have a Dana from a 71 b Body and unfortunately the sure grip slips at the track causing 1 wheel to spin. I wanted to replace clutches in the sure grip unit or replace the sure grip unit. I would ask for guidance on which clutch pack to buy to refresh the sure grip, I believe it's the...

I was cruising on the highway at 3K rpm and I heard alot of racket coming from under the hood, I had the car towed and after inspecting I found 1 rocker demolished, the pushrod to that rocker Blue at the tip, The intake rocker next to it was ok but the pushrod which is a Manton .130 thick turned...

Hi I am trying to locate the big plastic bushing in the middle of the wiper system for my 79 magnum. It broke off and no wipers Can anyone help me locate the number? or where to get it? Thanks alot

My 79 Magnum originally has a Trans cooler the we all seen goes through the rad then to cooler and back to rad. I'm replacing my rad with a Wizard and was wondering if it better to do that or to bypass the rad and just go straight to the cooler. I do lots of driving and loose converter and want...

Hi, I'm looking for a good radiator for my 79 Magnum XE, It has a 451 doing over 600 hp and it just getting to hot for comfort, on longer drives the temps just keep ever so slowly creep up till it gets to 3/4 on the guage and the thing is boiling in the overflow bottle, around town it's not too...

Hi All Happy belated New Year to all and stay safe. I originally had a 9.25 diff in my 79 magnum and many years ago I found a Dana 60 from a 71 GTX which bolted right up and even eliminated the ISO stuff, the reason was because I was racing the car as well as car show duty and all was good...