Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Please don't get too personal!
I have a 67 GTX 440, auto, 3:23 8 3/4. I pulled the axles to press new bearings on. AFTER I finished I noticed the splines on the drivers side. At first I thought someone put shorter axles in it, but then a good friend told me that the sure grip is coming...
Does anyone who has reset an odometer have any recollection of how the numbers "felt" when spinning. I'm changing a speedo and reset the odometer to the correct mileage. I noticed that when each barrel goes from 9 to 0 and trips the next one, it doesn't let go of it to continue to spin freely...
I have two 235/70 15 Radial TAs and one 215/70 15 Radial TA. All three have incredible tread. I drive like a little old lady. They are around 10 years old and I decided to buy new tires. They still have the nubbies inside the tread groove (they go sideways). Side walls are perfect as is the...
I'm buying a car with a reverse manual valve body and I'd like to go back to stock. Does anyone know if this is something I can convert back to stock or if I have to replace the whole valve body?
Sorry, it's a 66 727.
This has been a project of mine for more than 2 years. I'm not in the business of repro, I'm just a Coronet owner who has been frustrated with not being able to get these letters.
What I have are repro letters for:
67 Coronet hood
67 Coronet 500/RT rear
67 Charger hood
68 Coronet rear
69...
I was planning on making a small paint booth kind of like a work bench with side walls and a soffit across the top so I can paint small things inside my shop with out the smell. I have some ideas, but have nothing go by or copy. I was planning on using some sort of small exhaust fan, but...
I have a 71 B-body Dana with 3.54 all gone over. It was an original low mileage rear that I didn't know was in perfect condition when I got it. So I had it gone through and was told I wasted my money because the rear end guy really didn't do anything. He did convert to green bearings, sand blast...
I have two P23560R15 Firestone Firehawk tires. Both in great condition. I guess I drive like a little old lady as I never wore them out. These would be perfect for someone who has trouble keeping tread on their back tires. $50 for the pair.
I also have one 15 x 7.5 Magnum 500 with 4.25 back...
Does anyone have any preferences or opinios on repro glass for a 67 Coronet. I was thinking of ordering a complete set but have no idea where I should go.
O.K., so last night I learned how NOT to rebuild an alternator. I took it apart to change the front bearing, simple right? Well the first bearing I installed cracked the inner sleeve. Not sure how I did this, but maybe it was a few thou too small. So apart it came again.
After the second...
Has anyone ever adjusted the linkage on a heater box for a 66-67 b-body? I've been working on a 67 Belvedere for a while, I upgraded all the underhood parts, rebuilt the vacuum switch, and now it won't switch to heat until you go to defrost. All the vacuum lines are correct and I used the...
Anyone else have an ultrasonic cleaner?
I've had a little cheapo one from harbor freight that works OK for little things. I use Simple Green in it, but you have to run the thing through quite a few cycles and it takes forever to heat up.
So I found a big one on Craigs List, 10 gallon. It...
Hope the mods don't mind if I ask this here.
Is there anyone here who is familiar with a 99 Dodge 46RE transmission in a van?
I'm having problems that I think are an easy fix.
If anyone can help, please PM me contact info, it would be much appreciated!
Rich
Broken exhaust stud.
I thought I'd get some ideas before I screw things up...
I'm changing one of the exhaust manifolds on my 96 E350 (Sorry Ford, I know). It was cracked, had some loose bolts and one broken. Everything is out but the broken stud. It broke about one thread counter...
I started looking at auto tank drains for my compressor and simply got overwhelmed (that might be an extreme desc.), but I thought I'd ask what others here are using. I'm not afraid of buying quality since this is something rather important. It seems I clearly cannot be responsible enough to...
Hi guys, I'm converting a 67 Belvedere with factory AC to the modern compressor, lines, condenser, drier, and expansion valve.
The water shut off valve leaks, and is currently bypassed. I need to do something with it. I could send it out and have it rebuilt, but that would require taking...