Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Rebuilt 18 spline A833 transmission for sale. Has both B and E body shifter mounts, comes with back up light switch and speedometer drive. 0 miles since rebuild. Located in Central Oregon. $2500
It makes me wish I was 40 years younger... stepping on the clutch, the sound of the exhaust, the solid lifter sound. Reminds me of my first Hemi car ride. It was a class mates 68 Road Runner. I was sure it lifted the wheels off the ground
After playing with Chevys for years and switching to Mopar I ended up with a spare 427 Chevy engine and an 18 spline Mopar 4 speed transmission. I thought I would do one more project and put them together. I bought a 73 Camaro Rally Sport (very rough) re-skinned the whole car, put the 427 in...
I liked the bigger front turn signals the '70 Charger had so I bought a used front valance and put the '68 and '70 together. I proceeded with the interior, all new dash pads & gauges, vinyl/leather upholstery and upper and lower trim panels etc.
Next was paint, I wanted something different so I...
I am used to going 3-5 states over to get a new project so when I saw this 68 Charger only 5 hours away I knew it had to be the Hemi Charger I've dreamed of. After arriving at the scene you can imagine my disappointment in seeing it was just a 318 like I was actually told. I was sure that was...
After searching fuel sender issues I see it is common to have inaccurate and non working fuel sending units sold to us. I am on my second unit for the 68 Charger and ran out of gas again when the float stuck. Who has a brand that works well, does anybody know??
Up grading to a Borgeson steering box, with a question on the factory coupling removal. Will the coupling slide up the steering shaft far enough to clear the steering box input shaft or what is the secret to separate the two? The roll pin is out.
thanks in advance
The horn on the 68 Charger is intermittent at best. I have found the steering shaft must be the "ground" source for when you honk the horn if you turn the steering wheel it makes a better contact somewhere and the horn goes off. I can do the same test with a test light. If you ground the horn...
I have a Dana 60, rebuilt with new Yukon 3:54 ring and pinion, new bearings and seals through out, Green axle bearings, complete with new lug bolts, 10"brakes and drums. It has the power lok posi carrier. BOM numbers are 602957 5, date code 12 18 8. Shipping would be tough but if you do the...
Does a 68 Charger have 4 way flashers standard or was that an option? where would the button be to turn them on? What was the first year factory tilt was offered in the B body?
thanks in advance
1966/67 B body, 11 inch, hemi cast iron bell housing in great condition. NO cracks, all threads and holes are good. Original as they come for the A 833. Located in Central Oregon , zip is 97756. $850 plus shipping.
Does anyone know if this intake manifold that Ray Barton sells fits under the hood of a 68 Charger with the oval, single four bbl air cleaner, the carb would be an 850 Holley??
The intake manifold from Classic Industries mn2761 (that says arriving soon) has said that for 10 months, I ordered...
We got the Indy Maxx block, the Edy heads, the Eagle crank and rods. The Diamond pistons are coming and so is the cam. The Engine shop talked me in to a solid lifter roller instead of a hydaulic roller, that will be a first for me. It's going into a 68 Charger with the A 855 trans and a Dana 60.
The engine shop called late last week that the Indy aluminum Hemi block had arrived after 6 weeks of prep work. The next day Jamie calls to say I am up on the list of those wanting an A855 5 speed Trans. After 6 years of waiting I would buy one even if I only had a VW! That will go perfect...
What arms and shafts do you guys like when building an all aluminum 472. It sounds like we are going with a solid roller cam with .600 +- lift. The engine builder likes Indy rockers and shafts although he doesn't like their heads. We will be using Edelbrock heads with the proper springs. This...
I want to put a 472 crate Hemi in this 68 Charger I am working on. When I go on line to look for info there is plenty of information about the bad parts and poor quality of the engines from 10 years ago. Supposedly a place in Kentucky is now making them for Mopar Performance. Has anyone...
After 5 months of waiting on a list for a part that's not coming I found what I wanted in the first place. A billet aluminum air cleaner for my six pak. The Mopar Performance reproductions no longer seem to be available so I have been told. If you are looking for a six pak air cleaner call...
I love my 69 road runner after restoring it and immediately went and bought a 70 super bee and before I got done with the bee I have dragged home a 68 charger! What has come over me?
It has some of the usual good work and been tortured as well over the years. While I wait for a 6 pack air...