Search results for query: *

I have a 1967 Plymouth with a wiper motor needing repair. Any suggestions on who rebuilds these. They are real pricey if I have to buy one. Thanks

I am n the process of rebuilding my steering column in a 67 satellite console car. Attached is the picture of the horn ring. A roller moves around the disc as you steer the car. Question is who has one? Or what do you do f you want the horn button work. I have not found any repo...

I have a 1967 Plymouth console car. In rebuilding he steering column i need a new horn contact ring. There is a roller that runs on this contact ring which has a pig tail to go to the horn button. I assume unless I findthis part the horn will not work. /where can i find one as I do not see...

I need some direction: I have a 1967 Satellite, Originally it was a 318 V8 with a 727 transmission. I ripped out all the suspension. In the front I went with a Gerst coil over front end set up for a 440. After putting the engine and transmission in the car i find out the transmission mount...

Part number 2282187 is the part number for the horn ring in my steering column out of a 1967 satellite. Mine is worn out. Does anyone have one or know where I can get one. I would like to have my horn work and without this part cannot make it work as far as I know. Any suggestions or fixes...

I am putting a 440 into a 1967 Satellite. I have an IFS with a mustang ll rack. Question is on a center sump how far back is it from the front of the engine. Aftermarket pans like Moroso , Milidon etc do not give any dimensions. I have 5.5 inches back from front of the engine. Does anyone...

I have a 1967 Satellite I am building. the car is totally stripped out and finishing now all the replacement sheet metal. In any event all the wiring is stripped out. I am going to run a MSD distributor set up, upgraded alternator. I plan to use the factory steering column, the factory AC...

I have a 1967 Satellite A/C car. After much thought I decided to rebuild the heater AC box. All has gone well until I received Classic air's replacement Evaporator. It is allot different than the original. The drain pan is plastic where the original is metal. Classic's pan is mounted while...

I have a 1967 /satellite that everything is out of thus a very bare body at the moment. What insulation should on the firewall. Also what should I use above the headliner. I want to deaden the sound as well. I was thinking Dynomat on the floor. Any suggestions would be welcomed. Thanks

Anyone have a set of heater tubes for 67 satellite A/C car, mine are a little messed up on the ends and want to be sure 0 rings seal. Input is welcomed - thanks

I have a 1967 Satellite I pulled the rear glass out of to repair a piece of the rear window frame if you will. When I pulled the glass I took off the stainless then used some wire to cut the seal. There was not a rubber gasket there just black urethane or something like that. I looked up in...

attached are pics of the vacuum pod I am looking for - One of the vacuum ports on the face is broken off

How can you test a water heater valve? It is removed from the car. Most everything moves freely however there is a plunger of sorts that is part of the thermostat sensor . It is a little stiff. Also I would assume the rubber seal in the valve itseld is questionable. Anyone rebuild these...

I have a 1967 Satellite - This is a A/C car. The A?C box is all there. I believe it needs heater core, evaporator, at least one vacuum pod plus normal rebuild gaskets etc. So is it worth all the parts etc or just go aftermarket?

I am looking for opinions on what front suspension should I use on a 1967 Satellite with a 440. All the hard body work is now complete so I am planning the front suspension. Should I rebuild the existing OEM with upgrades. If upgrades what? Should I go to a coil over like Magnum or others...

Where can you buy parts for factory heater and AC box.. Mine is all original and not tampered with. I have no clue if anything works - Can you buy the water heater valve? I also have 2 vacuum actuators that have broken vacuum ports broken - Is the expansion valve availab le? I have found...

Who makes a wiring kit for a 1967 Satellite. The main thing is the dash . Lots of wiring there and the universal kits would not work well in my mind. So while the whole car is in a zillion pieces might as well rewire 47 year old wiring. Classic has a dash kit but I am not sure if it will be...

I have a 1967 Satellite I am restoring - Does anyone know how you clean out and paint under the cowl grill? I cannot figure out how to get in there to sand and paint. If you sprayed it thru the grill is would load up the grill and still not get to the bottom let alone get the debris in there...

I have a 1967 satellite. For some reason I really like this car otherwise I would find something else to do as body panels are close to impossible to get. Does anyone make front fender lower patch panels? Secondly does anyone make a trunk extension. This piece becomes bart of the inner...