Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi,
I have a mild 440 HP (1971 engine) in my 65 Coronet and was wondering if a step colder plugs than a 85 Autolites would bring down the heat a bit?
Another problem I have is pinging with vacuum advance hooked up and timing set 7° BTDC. Mechanical advance is limited at 19°. Shouldnt be...
Hi guys,
is that one worth buying or is it a waste of time and $?
http://www.rosevillemoparts.com/product_info.php/radiator-oem-62-76-/radiator-3-core/p/b-body-radiator-62-65-22-inch/cPath/347_141_479_480/products_id/9257
THX
Dan
Hi guys,
over here in Germany we need a working horn to pass DMV requirements.
The horn of my 65 Coronet is not working properly, I tried to adjust and repair it but it is just an old pain.
Now I`m looking for a more or less stock look alternative, do you have any ideas?
THX in...
Hi all ya early 727 pro`s,
my question:
is there a difference between a 1965 kickdown rod for a SB and BB, or was just one length used back in the days?
The reason for asking this, my car was originally equipped with a 273cui engine and now has a 440 + a Edelbrock performer intake...
Hi,
I really need a stock manual valve for a 65 console shifted BB 727 valve body.
No push button parts please, it is a cable operated 727.
THANKS in advance,
Dan
Hi Mopar bro`s!
In general my question is:
Will my kick down ever work with a EDE performer intake and a 1965 single piece kick down rod? :gah:
When I got the car it came with a Torker II intake.
Unfortunately the previous owner drove it without kick down linkage.
So I swapped the intake...
Hi,
I have SSBC disc brakes installed all around, but the brake power is unfortunately way too weak.
My installed SSBC parts are:
Booster http://www.summitracing.com/parts/ssb-a28144
Front: http://www.summitracing.com/dom/parts/ssb-a156/overview/make/dodge
Rear...
Hi,
I have just installed a freshly rebuild 1965 PB 727.
Shift cable has been adjusted correctly, it points right to the middle of the neutral switch when shifter is in N-position.
We also checked the band adjustment according to the manual today, but it didnt help :icon_silent:
The...
Hi,
I have a 19-spline TCI converter in my BB push button transmission and need to know what bolt pattern it has.
Can`t measure it myself at the moment, thats my problem.
I want to swap the tranny next week and need to know if I should buy another flexplate.
TCI #141400 .....cant find...
Hi,
I currently have following SSBC master cylinder + booster installed:
http://www.summitracing.com/int/parts/ssb-a28144/overview/
Front and rear SSBC disc brakes with the better HAWK brake pads.
My master cylinder has a 1.125" bore size.
I was told that for instance a 5/16" bore...
Hi,
as mentioned above, I`m considering to put seat covers of a 64 Polara in my 65 Coronet 500.
I think they look a lot better but not sure if they fit?
Any experience on that?
THX
Dan
Hi,
I`m looking for a AM radio for my 65 Coronet, should be in a good condition incl. knobs :Santa1:
Please drop me a pm if you have one 4 sale, a pic would be great.
THX
Dan
Hi guys,
I recently tried to replace the u-joints of my 65 Coronet, it was originally a 273cui, but now has a 440.
The driveshaft and the 741 differential case still seem to be the original SB parts.
According to rockauto and Summit I need MOOG #315G, but they do not fit!
The cap...
Hi guys,
as mentioned above I`m looking for a company that still builds 19-spline converters for my 1965 cable shift 727 transmission.
I need a stall of approx 2400rpm.
Thanks in advance,
Dan
Hi guys,
I have a 65 Coronet now epuipped with a 440 + BB 727 cable shift tranny.
Not sure what year the tranny is, maybe someone can ID it?
I need to find out which converter, speedo cable, speedo gear and tranny mount fits.
Thanks!
Dan
Hi,
the previous owner of my 65 Coronet deleted the heater box, it`s quite a mess under the dash :fucyc:
I want to rebuild everything and make it work again.
Does anyone have some hi resolution pics how everything is supposed to be connected?
Any technical sources apart from the manual would...
Howdy!
I just bought a heater core for my 65 Coronet at rockauto, but it doesnt fit :icon_silent:
Here is a pic of my firewall where you can see the in-and outlet of the heater core, the distance between the tubes is different:
Do you have an idea where to get the right core...
Hi guys,
I`m looking for a nice set of raised white letter tires.
Unfortunately my favourite tires aren`t available any longer (Firehawk Indy 500, Goodyears Eagle #1 Nascar).
All I can find at the moment:
- Mickey Thompson
- BF Goodrich Radial T/A
- Cooper Cobra (no option at all)...