• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Mr Belvedere

    1.03 torsion bars ?

    I went full QA1 setup and manual to power steering with Borgeson on the front all at the same time.
  2. Mr Belvedere

    1.03 torsion bars ?

    That's what I have on my 64 too. Just get yourself some good shocks, I'm running QA1's.
  3. Mr Belvedere

    Borgeson Pump Failure

    I had a brand new pump leak from the reservoir to pump seal. The reservoir didn't seem to be square to the pump so I swapped one from a used pump which was better. It was fine for a while but is now leaking again. At this point I think I'm going to just get another pump before spring. I...
  4. Mr Belvedere

    Contest! Guess and win free Mopar stuff!

    241.21 242.42 244.84 247.26 249.68 252.10 254.52 256.94 259.36 259.97
  5. Mr Belvedere

    Contest! Guess and win free Mopar stuff!

    220.03 221.46 222.32 225.08 226.15 229.83 230.01 238.97
  6. Mr Belvedere

    Contest! Guess and win free Mopar stuff!

    Edited right after I posted that.
  7. Mr Belvedere

    Contest! Guess and win free Mopar stuff!

    219.76 276.19 225.31
  8. Mr Belvedere

    727 transmission filler tube leak

    Sometimes the bracket to the bellhousing is bent and won't allow the tube to seat properly. So seat it properly then bend the bracket to keep it there.
  9. Mr Belvedere

    Build a seized 360 or buy and build a 440

    Hah! Whether you start with the 360 or big block 400 or 440 go with a stroker!
  10. Mr Belvedere

    Build a seized 360 or buy and build a 440

    What part of Canada you in? Parts already on hand are always cheaper but there is no replacement for displacement! lol What's your mopar friend circle like? Are they small block or big block guys?
  11. Mr Belvedere

    To much initial timing

    That thunderhead289 guy actually made 2 videos, in the second he clarified his reasoning was based on an engine with a stock cam. It's not a general rule you can just apply like he did, especially in the first video of his. I'm a manifold guy, but I will say ported is easier to deal with as it...
  12. Mr Belvedere

    fuel lines Holley vs Promax

    If using these lines I would disconnect at the tee and leave the hose attached to the bowl. You ain't getting to those easily anyways.
  13. Mr Belvedere

    New guy with first bb mopar

    Welcome, glad to see another early B body in Calgary.
  14. Mr Belvedere

    Recommendations for valve covers 440

    I like the Weiand version better, but you hardly ever see these.
  15. Mr Belvedere

    Engine will not idle and is very choppy

    Where's the fuel in the sight glass on the fuel bowls? I'd check your needle and seat on the carb and clean with carb cleaner while they are out. I bet something got stuck in there with all the changes. I flush and blow out the lines before installation to make sure they are clean. Edit: If...
  16. Mr Belvedere

    The QA1 Suspension package

    It's not that bad, just make sure you know how to loosen off the torsion bars and have a tool to remove the bars without damaging them(unless scrapping the bars). Also use the Bergman coupler instead of the Borgeson one.
  17. Mr Belvedere

    The QA1 Suspension package

    I have the QA1 front end kit, Borgeson box and PST 1.03 bars. Very happy with everything and there is more than enough caster built into their UCAs so adjustable ones shouldn't be necessary if just a driver.
  18. Mr Belvedere

    1963-65 vs 1966-up b-body k-member question

    Is there something wrong with the current K? Slant 6 car originally maybe? Should be no problem finding a 66up K here in the Calgary area. I'll ask around if anyone I know has one available. Also there's the Northern Mopars club classifieds https://mopars.org/classifieds or post a wanted...
  19. Mr Belvedere

    New here ! New to 62-65s !!

    There is someone that has converted a 4 door to a 2 door and documented the process. It was either on here or on youtube. Search around and welcome to the 64 club. Edit: here's a detailed thread https://www.forbbodiesonly.com/moparforum/threads/1964-dodge-2-door-conversion.26525/page-2
  20. Mr Belvedere

    WTB sun water temp guage

    Not a water temp gauge but old Sun oil temp gauge I just picked up with some other parts.
Back
Top